Digital Photography Review news

Sigma says goodbye to DSLR lens development

Image: Sigma

Sigma recently made a long list of announcements ahead of CP+. These included the drastically different BF mirrorless camera, ultra-telephoto 300-600mm F4 DG OS Sports lens, versatile 16-300mm F3.5-6.7 DC OS lens, nine reworked I-series primes for L-mount and some new branding. In case that wasn't enough, though, according to Amateur Photographer, the company also revealed it will focus entirely on mirrorless lenses moving forward.

You may have noticed that all of Sigma's newly released lenses lack the "DN" label typically found on the company's mirrorless lens lineup. That label, which stands for Digital Neo, was used to indicate that the lens was designed for mirrorless cameras rather than DSLRs. It seems that Sigma no longer thinks the label is necessary, as all its new lenses will be for mirrorless cameras only.

Amateur Photographer claims that the company specifically said it has stopped development of new DSLR lenses, though Sigma has not issued a statement itself. Even without a statement, though, it's easy to make assumptions to that effect. After all, Sigma hasn't released a new lens for DSLRs since late 2018, so it seems like a safe assumption.

This news isn't overly surprising, given the decline in DSLR camera production. Pentax is the lone holdout, as it is reportedly working on a new full-frame DSLR and released the Pentax K-3 Mark III Monochrome in 2023. However, outside of Pentax, the last new DSLR models on the scene were from Nikon and Canon in 2020.

Still, while new DLSRs aren't coming out, the use of DSLRs – and DSLR lenses – appears to be going strong. A quick look at photo competition results reveals many of the winning images were taken with DSLRs. On a smaller scale, students in the college class I teach largely use DLSRs, either borrowed from parents or purchased because they were cheaper than their mirrorless counterparts.

Additionally, camera and lens rental house LensRentals revealed DSLR lenses are anything but dead in its annual report released in December. That report compared 2023's and 2024's most popular photo and video gear, and interestingly, Canon EF-mount lenses and cameras increased in popularity and claimed quite a few top spots. In fact, the Canon EF 24-70mm F2.8L II was number one, while the Canon EOS 5D Mark IV took the tenth spot.

Even still, given the dwindling support for and production of DSLR cameras from major brands (including Sigma), it only makes sense that the production of DSLR lenses would also start to wind down. Sigma's move to end development of new DSLR lenses seems in line with that. Plus, the company has likely made all of the DSLR lenses it needs to, given the current status of the DSLR camera market.

Does this officially mean that DSLRs are dead? Likely not, given that there are still plenty of used and new DSLR camera and lens models available for purchase and rent. That includes Sigma DSLR lenses, which are still for sale, just as you can still buy Canon and Nikon DSLR lenses. But, it does perhaps put more of an expiration date on the technology.

A trip to the Sigma museum

Photo: Dale Baskin

DPReview editors Dale Baskin and Richard Butler are currently in Japan covering the launch of the Sigma BF and the upcoming CP+ trade show. As part of the trip, they toured Sigma's factory in Aizu, Japan, where they discovered something special: a museum full of the company's products from the past several decades.

We've posted a mini museum tour on Instagram, which you can see below. It includes a look at some interesting pieces of photography history, including the Mark 1, Sigma's first SLR, produced in 1976, the SD9, the company's first digital camera and a showcase for the then-new Foveon X3 sensor and the first lens in Sigma's now-renowned Art lineup.

View this post on Instagram

A post shared by Digital Photography Review (@dpreview)

If the embed doesn't work, you can View this post on Instagram

A post shared by Digital Photography Review (@dpreview)

" rel="noopener" target="_blank">check the video out here.

Nikon brings pro video features to the Z6III and Z8 with its latest firmware update

When you use DPReview links to buy products, the site may earn a commission. Photo: Richard Butler

Nikon has quietly released new firmware for its Z8 and Z6III cameras. These updates bring features previously introduced to the Z9 in December to two more of Nikon's mirrorless bodies. The focus is clearly on video, as all of the firmware changes in version 1.10 for the Z6III and version 2.10 for the Z8 are video-related. They address a range of custom settings and fix a problem with N-Log that has plagued the Z6III since launch.

The standout update for the Z6III is a change for N-Log. Nikon says it has "reduced noise in dark areas of N-Log videos." This should be a welcome change, as some users have reported seeing frustratingly high noise and flickering in the shadows when shooting N-Log. Most have mentioned this issue only crops up when shooting in low-light situations, though some have said it's more widespread. Either way, this firmware update should hopefully solve the situation.

The other most notable change is that both cameras will now have the option to set a shutter angle instead of a shutter speed. Shutter angles are useful for professional videographers who frequently change recording framerates since shutter angles remain consistent, unlike shutter speeds. Like the Z9, the Z6III and Z8 will support 15 steps of shutter angles from 5.6° to 360°.

Outside of shutter angles, the firmware updates include various custom controls and settings. They introduce custom zebra pattern colors, with the option to choose black, gray, red, green, or blue. You can adjust the transparency, size and position of the histogram and wave-form monitor. Hi-Res Zoom is now available when the image area is set to DX.

Nikon also introduced a set of features specific to its 28-135mm f/4 PZ lens, including custom controls, the ability to use power zoom and Hi-Res zoom at once and the ability to load and save zoom position. Plus, users can customize the direction of rotation of the zoom ring and how far it needs to be rotated to go from wide to telephoto. The Z8 also gets the benefit of configurable photo and video modes.

You can download firmware v1.10 for the Z6III and v2.10 for the Z8 as of today.

A practical ultra-wide: Sony's new 16mm F1.8 prime

When you use DPReview links to buy products, the site may earn a commission. Image: Sony

Sony has announced the FE 16mm F1.8 G, a new ultra-wide, fast prime for full-frame E-mount cameras. The company's lineup hasn't exactly been short of wide-angle options, but Sony is pitching this as a happy medium between its existing 14mm and 20mm F1.8 options for those interested in videography, landscapes and more.

The 16mm F1.8 is comprised of 15 elements in 12 groups, with 2 aspherical lenses and 3 ED elements. Its aperture has 11 blades, which Sony says should provide smooth, circular bokeh. It can focus on subjects at as close as 0.15m (5.9") away.

The 16mm F1.8 packs several features into a relatively compact body

At 304g, it's relatively lightweight, and it packs several features into a relatively compact body. The lens is 75mm long and has an aperture ring that can be locked and set to either clicked or clickless mode, as well as a customizable focus hold button. It accepts 67mm filters. The body is weather-sealed, and the front element has a fluorine coating to repel dirt, oils and water. Autofocus duties are handled by a pair of linear motors, and the lens is compatible with the a9 III's 120fps mode.

Image: Sony

Sony says its new lens will be more practical than the wider 14mm GM model, as it's much more affordable, weighs 156g (5.5oz) less and doesn't have a bulbous front element that prevents you from using screw-on filters. While the 16mm is similar in price to the 20mm model, its field of view gives you a bit more room when shooting large or close-up subjects or vlogging. Sony also says the 16mm will be much better than the 20mm when it comes to focus breathing, which could be a selling point for videographers.

The FE 16mm F1.8 G will cost $800 and will be available starting in April.

Buy now:

Buy at B&H Photo

We were able to spend some time with a pre-production copy of the lens and put together a sample gallery, which you can see below.

DPReview sample gallery Sample galleryThis widget is not optimized for RSS feed readers. Click here to open it in a new browser window / tab.

Press Release:

Sony Electronics Launches the Ultra-Wide 16mm F1.8 G Full-Frame Prime Lens

SAN DIEGO, Feb. 26, 2025 - Sony Electronics introduces the 16mm F1.8 G (SEL16F18G), a full-frame E-Mount lens that combines an ultra-wide 16mm focal length with a compact, lightweight build. Delivering high-resolution image quality, smooth bokeh, precise autofocus, and a bright F1.8 aperture, this lens is ideal in a variety of photo and video scenarios including landscapes, architecture, astrophotography, and more.

"At Sony, we are committed to providing creators of all levels with a diverse range of lens options to meet their artistic and technical needs,” said Yang Cheng, Vice President of Imaging Solutions, Sony Electronics Inc. “The 16mm F1.8 G is now the widest prime lens in our G lens lineup and pairs seamlessly with all our latest full-frame Alpha series cameras, as well as the FX3 and FX30 cinema cameras. With 79 E-Mount lenses now available, we are continuing our mission to ensure photographers, filmmakers, and creators have a breadth of high-performing lens options to bring their visions to life."

Ultra-Wide Performance with Stunning Bokeh

The 16mm F1.8 G is engineered for breathtaking, dynamic perspectives with an ultra-wide 16mm focal length. Its advanced optical construction includes two AA (Advanced Aspherical) elements to ensure razor-sharp resolution across all apertures. A combination of one Super ED (Extra-low Dispersion) glass element and three ED elements effectively suppresses chromatic aberration, delivering edge-to-edge clarity. Additionally, Sony’s optimized coating minimizes flare and ghosting, resulting in stunning image quality even in challenging lighting conditions.

With a bright F1.8 maximum aperture and an 11-blade circular diaphragm, the 16mm F1.8 G produces beautiful, creamy bokeh that enhances subject separation. Its impressive close-up performance allows for a minimum focus distance of just 0.5 ft (0.15 m) with autofocus and a maximum magnification of 0.25x. When using manual focus, these values improve up to 0.43 ft (0.13 m) and 0.30x, enabling unique wide-angle compositions with extraordinary depth.

Powerful Performance in a Compact Form

Through advanced optical engineering, including Sony’s high-precision AA lens elements, the 16mm F1.8 G maintains ultra-wide capabilities in an impressively compact and portable form factor. Measuring just 3 x 3 in (73.8 x 75 mm) and weighing approximately 10.8 oz (304 g), it offers exceptional mobility without compromising image quality. Designed for professionals on the go, this lens excels in capturing expansive landscapes and intricate architectural compositions with precision and clarity.

Fast and Accurate Autofocus

Equipped with two XD (Extreme Dynamic) linear motors, the 16mm F1.8 G delivers rapid, precise autofocus with remarkable tracking performance. A newly developed control algorithm enhances responsiveness while reducing delay and vibration, ensuring smooth, near-silent operation. This makes it an exceptional choice for both stills and video, especially when capturing fast-moving subjects.

Optimized for Stable Video

Designed with videographers in mind, the 16mm F1.8 G minimizes focus breathing for seamless focus transitions. It fully supports the breathing compensation function1 available in compatible Sony Alpha camera bodies and pairs effortlessly with in-body Active Mode2 image stabilization to ensure steady footage, even while shooting handheld or on the move. The lens also features a standard 67mm front filter thread, making it easy to integrate with a wide range of filter accessories. The compact design3 is ideal for gimbal use.

Intuitive Controls and Reliable Build

The 16mm F1.8 G offers comprehensive manual controls, including a responsive focus ring, customizable focus hold button, focus mode switch, aperture ring, and iris lock switch. The aperture ring allows for tactile exposure adjustments, while the click ON/OFF switch enhances flexibility for both photography and video applications. Built to ensure durability and reliability in challenging environments, the 16mm F1.8 G features a dust- and moisture-resistant design and a fluorine-coated front element.

Pricing and Availability

The 16mm F1.8 G will be available in April 2025 for approximately $799.99 USD and $1099.99 CAD. It will be sold directly through Sony and at a variety of Sony’s authorized dealers throughout North America.

A product video on the new 16mm F1.8 G can be viewed here: https://youtu.be/04fkjfK1tbQ

For detailed product information about the 16mm F1.8 G please visit: https://electronics.sony.com/imaging/lenses/full-frame-e-mount/p/sel16f18g

1 Camera compatibility info at: https://www.sony.net/dics/breathing/

Not available when shooting stills. Angle of view and image quality may change slightly when this function is [ON]. Effective compensation may not be achieved in all situations.

2 Compatible models only

3 Not guaranteed to be 100% dust and moisture proof

Sony FE 16mm F1.8 G Specifications: Principal specificationsLens typePrime lensMax Format size35mm FFFocal length16 mmImage stabilizationNoLens mountSony E, Sony FEApertureMaximum apertureF1.8Minimum apertureF22Number of diaphragm blades11OpticsElements15Groups12Special elements / coatings2 asph, 3 ED, flourine coatingFocusMinimum focus0.13 m (5.12″)Maximum magnification0.3×AutofocusYesMotor typeLinear MotorFocus methodInternalDistance scaleNoDoF scaleNoPhysicalWeight304 g (0.67 lb)Diameter74 mm (2.91″)Length75 mm (2.95″)SealingYesColourBlackFilter thread67 mmHood suppliedYesTripod collarNo

Sony's 400-800mm super-telephoto is built for maximum reach

When you use DPReview links to buy products, the site may earn a commission. Image:Sony

Sony has announced the FE 400-800mm F6.3-8 G, the company's new furthest-reaching super-telephoto zoom for full-frame cameras.

It's made of 27 elements in 19 groups, with 6 ED elements, and has an 11-blade aperture. At 400mm, its minimum focusing distance is 1.7m (5' 7"), which goes up to 3.5m (11' 6") at 800mm. It's also compatible with Sony's 1.4x and 2x optical teleconverters, which can give you up to 1600mm of reach at the cost of 2EV of light.

The lens weighs 2475g (4.66lb) and accepts 105mm filters. It's weather-sealed and has a fluorine coating on the front element. It has three customizable buttons as well as a variety of switches to control focus mode, its focus limiter and optical image stabilization. Its zoom mechanism is internal, and Sony says its weight distribution puts the center of gravity over the integrated tripod foot.

The 400-800mm is compatible with the 120fps burst mode on Sony's a9 III, and its autofocus is handled by two linear motors.

Sony says the lens is meant for wildlife and sports shooters who need a bit more reach than its 200-600mm F5.6-6.3 or 600mm F4 lenses can provide. It will be available in March, at a retail price of $2900.

Buy now:

Buy at B&H Photo DPReview samples Sample galleryThis widget is not optimized for RSS feed readers. Click here to open it in a new browser window / tab.

Press Release:

Sony Electronics Unveils Specialty 400-800mm F6.3-8 G OSS Super Telephoto Zoom G Lens: The Furthest Reaching Sony Lens To Date

SAN DIEGO, Feb. 26, 2025 - Sony Electronics introduces the 400-800mm F6.3-8 G OSS (SEL400800G), its longest-range full-frame E-Mount lens to date1, setting a new benchmark in focal length reach for the Sony mirrorless system. The Sony E-Mount lens lineup previously peaked at 600mm, but the 400-800mm F6.3-8 G OSS extends the focal length to an incredible 800mm for specialty shooting. The additional reach is especially beneficial for birding, wildlife, aerial, and sports photographers seeking long-range lens capabilities.

The 400-800mm F6.3-8 G OSS is designed to provide exceptional image quality and lens control across the entire ultra telephoto zoom range. Its internal zoom mechanism ensures stable handling, while its advanced optical design delivers creamy bokeh and sharp, detailed images. With a fast and accurate autofocus system combined with a durable, versatile build, this lens is a powerful tool ideal for both photographers and videographers documenting far away subjects.

"At Sony, we are dedicated to equipping photographers and videographers with the tools they need to push creative boundaries. The 400-800mm F6.3-8 G OSS is a testament to this commitment, delivering unparalleled reach and reliability as a super telephoto within the G Series lens line-up,” said Yang Cheng, Vice President of Imaging Solutions, Sony Electronics Inc. “By continually expanding our lens offerings, we ensure that Sony mirrorless users have the specialized gear to capture stunning imagery in even the most challenging environments."

Extended Reach, Bokeh, and Autofocus

As the newest addition to our G lens lineup, the 400-800mm F6.3-8 G OSS is designed for exceptional performance and consistency, even while extended to the furthest focal length. It is the first Alpha lens to offer a super-telephoto range of 400mm to 800mm, delivering unparalleled reach for the Sony Alpha full-frame system. For applications such as birding photography, the 400mm to 800mm zoom range allows photographers to locate subjects at the wide 400mm end before zooming in up to 800mm for tight, detailed shots. For those who need even more reach, the 400-800mm F6.3-8 G OSS is compatible with the 1.4x and 2x teleconverters2, extending its range up to a staggering 1600mm.

An internal zoom mechanism maintains a balanced length and weight distribution while adjusting focal lengths—enhancing stability and handling. A smooth, responsive zoom ring allows for precise adjustments, while a carefully designed structure helps prevent accidental focal length shifts. In addition, this lens’ zoom ring features a short rotation throw which enables quick zoom adjustments essential for tracking fast-moving subjects in birding, wildlife, and sports photography.

The 400-800mm F6.3-8 G OSS is designed for exceptional optical performance, featuring an 11-blade circular aperture that produces beautifully smooth, creamy backgrounds with stunning bokeh when shooting at a narrow depth of field. Six ED (Extra-low Dispersion) glass elements effectively minimize chromatic aberration, while advanced coatings suppress flare and ghosting, ensuring crisp, high-contrast images even in backlit conditions.

For fast, precise focusing, the lens is equipped with two precision linear motors, enabling seamless tracking that keeps up with the Alpha 9 III’s 120 fps3 maximum burst speed and up to 240 fps in video4. Its quiet operation, focus range switch, and suppressed focus breathing allow for enhanced control and make this lens an excellent choice for both photo and video use.

Enhanced Stability, Control, and Durability

The 400-800mm F6.3-8 G OSS delivers solid support for both handheld and tripod-mounted shooting. Its built-in Optical SteadyShot™ (OSS) image stabilization minimizes shake-induced blur, and when paired with an Alpha camera body featuring in-body stabilization, stability is further enhanced. Durable construction, optimized balance, and a non-removable foot maximize reliability and performance. For tripod use, the tripod mount foot allows quick rotation between horizontal and vertical orientations, offering versatility for various shooting scenarios.

Designed for high-level control and reliability, the lens features three customizable focus hold buttons positioned at 90° increments for easy access in any orientation. Full-time Direct Manual Focus (DMF) automatically engages manual focus when the focus ring is adjusted, allowing for seamless fine-tuning. The redesigned lens hood includes a lock button and filter opening, ensuring effortless operation in any environment.

Additionally, the dust- and moisture-resistant5 design enhances durability, while a fluorine-coated front element repels contaminants for easier cleaning.

Pricing and Availability

The 400-800mm F6.3-8 G OSS will be available in March 2025 for approximately $2,899.99 USD and $4,099.99 CAD. It will be sold directly through Sony and at a variety of Sony’s authorized dealers throughout North America.

A product video on the new 400-800mm F6.3-8 G OSS can be viewed here: https://youtu.be/P7om9s8E6Fk

For detailed product information about the 400-800mm F6.3-8 G OSS please visit: https://electronics.sony.com/imaging/lenses/full-frame-e-mount/p/sel400800g

Exclusive stories and exciting new content shot with the new 400-800mm F6.3-8 G OSS and Sony's other imaging products can be found at www.alphauniverse.com, a site created to inform, educate, and inspire content creators.

1 As of the February 2025 product announcement

2 Sony FE 1.4x Teleconverter SEL14TC Lens and 2x Teleconverter SEL20TC Lens

3 Sony test conditions. Maximum continuous shooting speed may be lower in some conditions. Continuous shooting speed may vary in the AF-C focus mode.

4 Functional compatibility may vary depending on the camera used.

5 Not guaranteed to be 100% dust and moisture proof

Sony FE 400-800m F6.3-8 G Specifications:

Principal specificationsLens typeZoom lensMax Format size35mm FFFocal length400–800 mmLens mountSony E, Sony FEApertureMaximum apertureF6.3–8Aperture ringYesNumber of diaphragm blades11OpticsElements27Groups19Special elements / coatings6 ED, flourine coatingFocusMinimum focus1.70 m (66.93″)Maximum magnification0.23×AutofocusYesMotor typeLinear MotorFocus methodInternalDistance scaleNoDoF scaleNoFocus distance limiter10m - near, Infinity - 8mPhysicalWeight2475 g (5.46 lb)Diameter120 mm (4.72″)Length346 mm (13.62″)MaterialsPlasticSealingYesColourWhiteZoom methodRotary (internal)Power zoomNoHood suppliedYesTripod collarYes

Share your thoughts and speculation as we get ready for CP+

Image: CP+

CP+ – the International Camera and Photo Imaging Show – in Yokohama, Japan, is nearly upon us, running from February 27 to March 2. Some of the DPReview team is onsite in Japan and will get a chance to see things in person and chat with brands. If you're curious about our past coverage, you can check out what the team did last year.

This year's show is already gearing up to be quite an event for new releases and announcements in the camera and lens worlds. Even though things haven't officially kicked off yet, we've seen some pre-show surprises, like the Sigma BF, many Sigma lenses and the Panasonic S1RII mirrorless cameras.

What do you think will come next? Visit our forum thread about the show and let us know what you think will get announced this week!

Camera enthusiasts already have a lot of thoughts on Sigma's "radical" BF camera

When you use DPReview links to buy products, the site may earn a commission. Photo: Sigma

On Monday, Sigma kicked off what looks to be a very busy week in camera news by announcing a new full-frame mirrorless camera called the BF. The company says it's an exercise in "radical simplicity," and the camera features only five buttons and a single dial, integrated storage and a menu system designed to put all your exposure settings at your fingertips.

Given how much of a departure this camera is from the mainstream, it's unsurprising that it's generated a fair bit of conversation among the camera enthusiasts in our forums and in the comments. We thought it'd be interesting to highlight a few to give you an idea of how the community has reacted to this bold new camera.

One important caveat: these opinions are entirely the commenters' own and don't necessarily reflect those of DPReview. Once we've had time to review the BF, our thoughts will be in our official review.

"Intriguing"

There are some launches where people see the camera and immediately decide they want it without further questions. That hasn't necessarily been the case with the BF, though the design and interface do seem to make people interested in at least trying one out.

"I'd love to handle one for a day, it looks super interesting," said MJ_Photo38. "Paying $2000 for one though? Hmm. Not sure about that."

Image: Sigma

SigmaChrome was also unsure about actually buying one – early in the thread, they showed some trepidation. "I'm sure it's a beautifully made piece of engineering but it doesn't seem to have been designed for human photographers. Sharp edges, no grip, not enough controls, no removable storage, only one port, no viewfinder.... This is not a versatile camera. Not for me I'm afraid."

After a bit more time to think about it, though, SigmaChrome seemed a bit more open to the idea. "I'd sure like to have a play with one too. The menu system seems to be nice and simple; Sigma is good at menu design. Maybe shooting with it for a day or two might make me change my mind. You never know... I might fall in love, or a least become infatuated."

ArchiMark, who owns a Sigma fp-L, says the BF "Looks very intriguing.....," and that it "will be interesting to see how it compares, especially in stills" to the company's compact, high-resolution camera.

Too minimal?

Sigma says the BF "cuts out everything that distracts, limits or stifles creativity." As a result, it lacks many of the things you'll find on most other $2000 cameras: there's no mechanical shutter, stabilized sensor, wireless connectivity, hot shoe, viewfinder, memory card slot or tilting screen, and there's only a single 10Gbps USB-C port for I/O.

A fair number of commenters aren't fans of the radical minimalism, with both SigmaChrome and SandyF saying that the camera isn't very versatile. "I see few positive selling points. It's more like what it does not have, rather than positive features," said the latter.

MJ_Photo38 agreed. "To me the BH only makes sense for the few people that want to have a extremely high end build quality, super modern design and UI, etc. This doesn't look like a pragmatic camera decision." Some people, like Jeffry7, were even harsher: "By ruthlessly stripping down the concept of a camera, Sigma has made a far less capable, and far less versatile a device."

The BF isn't exactly bursting with controls, and you'll have to compose using the fixed display. However, the company says the UI will provide a "distraction-free view."

Image: Sigma

The lack of a viewfinder seems to be the biggest sticking point, with Tom Schum lamenting: "why oh why did they not put an EVF in the BF? Can we have a BF2, a little bit bigger and with an EVF?" SnowBeard expanded on that thought in a separate thread: "Again, they left off a decent viewfinder - no EVF. The hype about this and some other cameras is 'we strip it down to its simple form so you can focus on the subject and what you want to say'. Maybe so but you still have to view the subject, no viewfinder makes that frustratingly hard. Viewing a 3 inch LCD from 10-12inches away is more like aiming a shotgun. Viewing the scene through an enlarged viewfinder is like being in the scene."

That's not to say that everyone agreed. Some of our members praised the design, with SigmaTog saying "Fantastic idea, wish I was younger, I would take it up immediately," and SandiWay saying that "It is 'beautiful' for sure."

"Beyond Foveon"

The BF's sensor is a conventional full-frame, 24MP BSI model that we suspect we've seen in several other cameras.

Image: Sigma

The other elephant in the room for the BF is its choice of color filter. Like the vast majority of cameras on the market, it uses a Bayer pattern to capture color. Normally, that wouldn't be notable, except that Sigma has been the flagbearer for Foveon technology, which works completely differently, capturing full-color data across the entire sensor rather than relying on interpolation. The company has said it's working on making a full-frame Foveon sensor – its previous efforts have maxed out with a 476mm�² APS-H sensor – but that's not what's in the BF.

Unsurprisingly, this comes as a disappointment for those who have been waiting years for a new Foveon camera. Responding to a joke about "BF" standing for "Beyond Foveon" (we're told it actually stands for "beautiful foolishness"), Heritage Cameras hopes it actually means "Before Foveon."

Roger also bemoaned the choice, saying "I was hoping to see something with a Foveon sensor, but maybe those days are gone." In another thread, Manzur Fahim and Tirpitz666 both cited the lack of Foveon as their reasons for not buying the camera, with the latter stating "No Foveon No Party, will happily continue to use my Merrills and Quattros."

Like a Leica The BF's design reminded several people of the Leica TL2.

Several users said the BF reminded them of something you'd see from Leica, specifically models like the TL, which was also machined out of aluminum, featured a photo-focused interface and did away with things like an electronic viewfinder.

"The entire design reminds me of the Leica TL & TL2," said bs1946. "A handful of simple controls and milled from a solid block of aluminum, even though Sigma claims the BF's milled aluminum block is a first." SaltyDogStudios agreed, saying that "Sigma seems to be taking a lot of cues from Leica on this camera," especially when it came to a focus on design. "I remember reading a blog post about the Leica TL and how it was a real conversation piece of a camera. [..]. That’s clearly what this camera is intended to be."

Photo: Sigma

DavidMillier made a similar connection, commenting: "Interesting, Sigma goes Leica/Hassie! Not for me, though. Whilst I love minimalist industrial design, there are certain things I demand of any camera: a built in viewfinder, a hand grip, minimum of two command wheels (I prefer 3 or even 4)." Roger had a similar take. "The camera reminds me of the Leica TL series which I wouldn't buy either."

Heritage Cameras, meanwhile, said the design "seems to make little sense logically, but (as with the Leica T) I want one anyway. I suspect I'm not alone."

Leica wasn't the only reference point people jumped to, with several commenters saying the design reminded them of something produced by Apple or Teenage Engineering. Another common point of comparison: the Panasonic Lumix S9.

Not the last word...

We've had the chance to get some hands-on time with the BF and plan on writing an article detailing our experiences and answering some of the most frequent questions we've seen about it. However, we want to get one out of the way right now: yes, it does have a tripod thread.

High-res hybrid: Panasonic Lumix DC-S1RII initial review

When you use DPReview links to buy products, the site may earn a commission. Sample galleryThis widget is not optimized for RSS feed readers. Please open this article's permalink in a browser to view this content.

Product photos: Mitchell Clark

The Panasonic Lumix DC-S1RII is the company's latest high-resolution full-frame mirrorless camera, now beefed-up with 8K video capabilities and improved autofocus.

Key features
  • Full-frame 44MP dual gain CMOS sensor
  • 8.1K/8K video at up to 30p
  • 5.76M dot viewfinder
  • Flip-out and tilt rear screen
  • ProRes 422 and ProRes RAW capture
  • Capture to CFExpress Type B, UHS II SD or external SSD
  • Multi-shot high res mode up to 177MP
  • 32-bit float audio via optional XLR 2 adapter

The S1RII will be available from late March with a recommended retail price of $3300.

Index: What's new New sensor

Rather than the 47MP used in the original S1R, or the 61MP chip used in Leica's SL3, Panasonic has opted for a slightly lower resolution but faster sensor for the S1RII.

It features dual conversion gain on which, as usual on Panasonic cameras, you can manually select which of its two readout modes it uses. Panasonic doesn't always disclose when it's using BSI technology, but in this instance it has confirmed it.

Autofocus

The S1RII represents the second generation of Panasonic cameras to feature phase detection autofocus, with the inherent depth awareness that this brings. The company says it's significantly improved both its subject recognition and its tracking algorithms in the new camera, to bring its performance closer into line with the best of its peers.

The S1RII has algorithms trained to recognize the following subjects:

  • Human
  • Animal (Dog, Cat, Bird)
  • Car
  • Motorcycle / Bike
  • Train
  • Airplane

We're told it should be quicker at finding a subject and better at continuing to track it, even if, for instance, the subject turns away from the camera or is partially obscured. As before, you can choose whether the camera homes-in on specific details, such as the helmet of a motorbike rider, the nose of a plane or the eyes of an animal. Selecting the more precise focus position can lower the system's responsiveness to smaller, faster-moving subjects.

Cinelike A2 color mode

The S1RII gains a new 'Cinelike A2' color mode, in both stills and video modes. It offers a very gentle response, somewhere between the flat, DR-prioritizing Cinelike D2 and the punchy, ready-to-go Cinelike V2 profile.

Panasonic says the A2 mode's color response stems from work they've been doing in recent months. And it's perhaps worth considering which partners Panasonic has been working with, recently, to guess at the significance of the letter 'A' in the name. Unlike the camera's Leica Monochrome mode, any connection isn't made explicit.

Real time LUT

The S1RII gains the Real Time LUT function we've seen on recent Panasonic cameras, letting you create and upload color and tone-modifying profiles in format with a workflow that's already widely supported across the industry. The S1RII allows you to load up to 39 LUTs onto the camera, with the option to combine two LUTs with varying intensity, if you wish.

Additional LUTs can be created or downloaded via Panasonic's Lumix Lab app.

False color

The S1RII becomes one of the first stills/video cameras to include a false color display option. This is a feature common in the video world, giving a mono preview with certain brightness levels highlighted in different colors, to help you recognize which bits of the image are clipped or near clipping and which areas are exposed as mid tones or at a level appropriate for light skin tones. This display can be used in boths stills and video modes.

Capture One tethering

The S1RII becomes the first Panasonic camera that can be shot, tethered, from Capture One, the popular studio software. We're told any decisions about whether to expand support to other models will depend on customer demand.

What's new for video

The 44MP sensor means the S1RII has slightly more horizontal pixels than necessary to deliver UHD 8K (7680 x 4320) footage and a fraction short of what's needed to capture the DCI 8K's 8192 x 4320 resolution. Instead it offers what Panasonic called 8.1K (8128 x 4288), which conforms to the same 1.89:1 aspect ratio as DCI footage.

The degree to which the sensor resolution is suited to 8K capture is unlikely to be coincidental, and the S1RII offers the kind of extensive video feature set that you might expect from the company that brought us the GH series, rather than the pared-back list of options the original S1R brought.

It also includes everything you'd expect from Panasonic: the option to set exposure in terms of shutter angle, waveforms, vectorscopes, filtering or custom lists of video modes, four-channel audio and 32-bit Float audio via the optional XLR2 accessory, support for anamorphic lenses and a tally lamp to let you know you're rolling. The attention to detail goes beyond the addition of a big red button on the front.

Video options: Output
dimensions Frame
Rates Crop MOV ProRes 1.89:1 modes 8.1K 8128 x 4288 30, 25, 24 1.0 4:2:0 – 5.8K 5760 x 4030 30, 25, 24 1.0 422/HQ 30, 25, 24 1.31 – RAW/HQ 60, 50, 48 1.04 4:2:0 – DCI 4K 4096 x 2160 30, 25, 24 1.0 4:2:2 422/HQ 60, 50 1.04 60, 50, 30, 25, 24 1.52 120, 100 1.10 4:2:2 – 16:9 Modes 8.0K 7680 x 4320 30, 25, 24 1.0 4:2:0 – 5.9K 5888 x 3312 30, 25, 24 1.0 – 60, 50, 48 1.11 – UHD 4K 3840 x 2160 30, 25, 24 1.0 4:2:2 422/HQ 60, 50 1.11 60, 50, 30, 25, 24 1.52 120, 100 1.17 4:2:2 – 3:2 Modes 6.2K open gate* 6432 x 4228 30, 25, 24 1.0 4:2:0 – 4:3 Modes 4.7K 4736 x 3552 60, 50, 48, 30, 25, 24 1.65 4:2:0 422/HQ** - Boxes marked green off All-I compression options.
- Red boxes have a ProRes option.
* 8.1K and 7.1K open gate capture promised in future firmware
** ProRes 422/HQ only available up to 30p

The S1RII can also shoot Full HD (1920 x 1080) footage at any of the frame-rates and crops offered in UHD 4K mode, with the additional ability to capture 120 and 100p footage from the APS-C region.

Dynamic Range Expansion

The S1RII gains a DR Expansion mode, letting you capture an additional stop of highlight information in high-contrast situations. This can be activated in any of the movie modes at frame rates up to 30p, and can only be applied when shooting V-Log footage (where the response curve can easily accommodate different levels of DR capture).

Base ISO 2nd gain step Standard color mode ISO 80 ISO 400 Cinelike D2, V2, A2 ISO 160 ISO 800 HLG ISO 320 ISO 1600 V-Log ISO 200 ISO 1000 V-Log + DR Expansion ISO 400 ISO 2000

This is not the same system as the dual readout DR Boost function in the company's 25MP Micro Four Thirds camera. Instead it moves to a higher bit-depth readout, meaning there's a rolling shutter cost to engaging it. It also boosts the minimum available ISO, to prompt the use of a lower exposure, to capture that additional stop of highlights.

Open gate shooting

At launch the S1RII will be able to capture 6.4K footage from the entire 3:2 region of its sensor, downscaled from full-resolution capture.

Open gate shooting lets you choose and adjust your crop during post production. It also makes it possible to frame wide and then take both landscape and portrait video crops if you're trying to deliver to multiple different output platforms.

5.XK at up to 60p, 4K at up to 120p

Like the S5II models, the S1RII gives you the choice of 1.89:1 DCI 4K capture or 16:9 UHD 4K, or 5.9K or 5.8K versions taken from the same capture regions. All four are available as 10-bit footage, with 4K encoded with 4:2:2 chroma precision and the 5.XK modes in 4:2:0.

Footage up to 30p is taken from the full width of the sensor using the full capture resolution, with a slight crop in to give 60p. 4K (in both flavors) is available at up to 120p with the addition of a further slight crop. Line skipping is used to deliver these 100p and 120p modes.

DCI and UHD 4K can also be captured at up to 60p from an APS-C region of the sensor.

UHD DCI Crop Rolling shutter Crop Rolling shutter 8K, 5.xK*, 4K
30/25/24 1.00 24.9ms 1.00 22.4ms 5.xK*, 4K
50/60 1.11 15.4ms 1.04 15.3ms 4K
100/120 1.17 7.3ms 1.10 7.3ms 4K/30 DRExp* 1.00 31.7ms 1.00 29.8ms *8.1K and 5.9K modes give the same results as DCI 4K, 8.0K and 5.8K matches UHD

Tellingly the rolling shutter rate in DR Expansion mode is consistent with the rate of 14-bit stills, which suggests it's based on 14-bit capture, explaining Panasonic's claims of greater dynamic range.

In turn, the 60p output's rolling shutter is consistent with the 12-bit stills readout rate. This stongly implies that the standard 24, 25 and 30p modes, which are slower than this but quicker than 14-bit mode are taken from 13-bit capture.

In addition to the conventional MOV compressed footage, the S1RII also lets you capture various resolutions in either ProRes 422 or ProRes RAW formats, both of which can either be recorded to the camera's internal CFExpress type B card or to an external SSD. ProRes RAW (with a choice of HQ or standard compression levels) is taken from a 1.31x crop of the sensor, whereas the ProRes 422 (again HQ or Std) is derived from the full-width 8.1K capture.

Forthcoming attractions

As usual for Panasonic cameras, the company has already given some details of features that are still being worked-on for the camera, and which it has promised will come in later firmware updates.

At launch the S1RII can capture open gate video footage at 6.4K resolution, but we're told 7.1K and 8.1K (native resolution) will be enabled in a later firmware update.

Similarly, the S1RII can currently output footage at up to 8K over HDMI but will gain the option to output a Raw data stream in 8.1K or 7.2K resolutions, at a later date.

How it compares

The new, more compact S1RII arrives in a market where you can choose between the high resolution Sony a7RV or pay more for the likes of Nikon's Z8 and Canon's EOS R5 II that are both high resolution and fast. The Panasonic occupies something of a middle ground: offering some of the speed of the faster cameras (a higher peak frame rate but with more rolling shutter), but at a lower cost than Canon and Nikon's Stacked CMOS cameras.

We've opted to include the Canon EOS R5 II in this table, but the Nikon Z8 ends up looking very similar in terms of areas of strength, if you were to substitute that in. We've also chosen the DSLR-shaped a7R V from Sony, rather than the smaller, less expensive a7C R, because the larger model more closely resembles the Panasonic in terms of form factor, viewfinder quality, shutter options and screen articulation. But if size and price are your biggest concerns, the a7C R is in the running.

Panasonic Lumix DC-S1RII Canon EOS R5 II Sony a7R V Panasonic Lumix DC-S1R MSRP $3300 $4300 $3900 $3700 Pixel count 44MP 45MP 61MP 47MP Sensor type BSI CMOS Stacked CMOS BSI CMOS FSI CMOS Stabilization
(IBIS / Synced) 8.0 EV /
7.0 EV – /
8.5 EV 8.0EV /
– 6.0 EV /
7.0 EV Max burst rate (Mech / E-shutter) 10 fps / 40 fps 12 fps / 30fps 10 fps / 9 fps / Viewfinder res / mag 5.76M dot OLED / 0.78x 5.76M dot OLED / 0.76x 9.44M dot
OLED 0.9x 5.76x dot OLED / 0.78x Rear screen 3.2" 2.1M dot Tilt + Fully Artic. 3.2" 2.1M dot Fully Artic. 3.2" 2.1M dot Tilt + Fully Artic. 3.2" 2.1M dot two-way tilt Max video resolution

8.1K [1.89:1] / 30p
UHD 8K / 30p
Full-width 5.9K 60p

DCI 8K / 60p
UHD 8K / 60p

UHD 8K / 24p

5K [3:2] / 30p
UHD 4K / 60p

Output options MOV H.264
MOV H.265
ProRes 422
ProRes RAW

MP4 H.264
MP4 H.265
Canon Raw (/Light)

MOV H.264
MOV H.265 MOV H.265
MP4 H.264 Storage formats 1x UHS-II SD
1x CFe B
External SSD 1x UHS-II SD
1x CFe B 2x UHS-II SD / CFe A 1x UHS-II SD
1x CFe B / XQD Flash sync speed 1/250 sec 1/250 sec
1/160 sec 1/250 sec 1/320 sec HDR output options (Stills / Video) - / HLG video HDR PQ HEIF / HDR PQ video HLG HEIF
/ HLG video HLG Photo / HLG video USB USB-C
3.2 Gen 2
(10 Gbps) USB-C
3.2 Gen 2
(10 Gbps) USB-C
3.2 Gen 2
(10 Gbps) USB-C
3.1 Gen 1
(5 Gbps) Battery life
LCD / EVF 350 / 300 540 / 250 530 / 440 380 / 360 Dimensions 134 x 102 x 92mm 139 x 101 x 94mm 131 x 97 x 82mm 149 x 110 x 97mm Weight 795g 746g 723g 1,020g

Despite being comfortably less expensive than its immediate peers, the S1RII's specs are competitive across the board. And while its video exhibits a fair bit more rolling shutter than the Stacked-sensor Nikon and Canon models, it significantly out-performs the Sony.

The a7R V's rolling shutter rate of 38ms means it can't deliver 8K/30, whereas the Panasonic can shoot 8K 30 and do so as fast as 24ms. This is respectable but not as impressive as the ∼13 and 14ms that the EOS R5 II and Z8 provide, respectively, from their much more expensive sensors.

Much of whether it's actually competitive, for both stills and video, will come down to whether the autofocus improvements are as significant as Panasonic promises.

Body and handling

The S1RII uses a body based on the smaller S5II series, rather than the more substantial design of the first-gen S1 series cameras. This leaves it both smaller and lighter than its predecessor.

It has the internal fan from the S5II, with two small exhaust ports on either side of its viewfinder hump. This doesn't give quite 'GH series' recording reliability, but still allows the S1RII to record for extended periods.

However, while the body itself is similar in size to the S5II, it has a deeper hand grip, making it more comfortable to use with larger lenses. It maintains a row of three buttons along its top plate, immediately behind the shutter button, but omits the top plate display that the Mark 1 had.

Other losses in the move to the smaller body see the S1RII offer only a single function button between the mount and the hand grip, and the replacement of the two-position switch at the lower corner of the front panel by a large red [REC] button (whose function can be customized).

The S1RII also goes without a flash sync socket, but gains a dedicated Stills/Movie/Slow&Quick switch. Moving the exposure modes to the right of the camera allows the drive mode to be promoted to the top of the left-side dial, making room for shooting mode to occupy the switch underneath. Both mode dials have toggle lock buttons.

The removal of movie mode from the exposure mode dial in turn provides room for five custom positions on the exposure dial, each of which can be customized separately for stills and video custom settings. Position 5 on the dial can be used to access custom banks 5-10, if you wish, giving you a total of up to ten photo and ten video custom setting sets. Thankfully the camera's settings can be saved to a memory card and duplicated across cameras.

Rear screen

On the back of the camera, Panasonic has adopted a similar screen layout to the Sony a7R V: a fully articulated rear screen mounted on a cradle that tilts up and down. This means that stills shooters can use the tilt mechanism if they want to keep the screen on-axis (and can flip the screen to face inwards for protection, when stowing the camera), but video shooters can extend the screen out and tilt it away from the mic, headphone and HDMI sockets while shooting.

Battery

The S1RII uses the same 15.8Wh DMW-BLK22 battery as the S5II, a significant reduction compared with the original S1R. Despite this, it achieves a CIPA battery rating of 350 shots per charge if you use the rear screen and 300 via the viewfinder. The usual caveats apply to this number: most people get many, many more shots out of a camera than the CIPA rating (between two and three times the rated figure isn't unusual). To put it in context, 350 is a respectable figure and shouldn't leave you caught out during a busy day's shooting, but it doesn't have the confidence-inspiring duration that Sony's a7R V offers.

A new DMW-BG2 battery grip is also available to fit the S1RII. It adds a second battery in the grip, and is designed to allow hot-swapping of batteries: the external battery is used until the battery door is opened, at which point the camera switches to using the internal battery until a new battery is inserted in the grip. The grip also allows the camera to use both batteries simultaneously, for high power-consumption combinations such as capturing high bit-rate video to an external SSD.

Initial impressions

The S1RII is an interesting proposition: replacing a camera we get the impression didn't exactly fly off the shelves. Panasonic has done a lot to broaden its appeal, making it smaller, faster, more video capable and, notably, less expensive.

The easiest to spot changes are on the video side of things: Panasonic pitched the S1R as a photographer's camera, so the decision to make the S1RII more of a hybrid sees even more of an expansion in video capabilities than we've become used to over the past few years.

The S1RII's sensor seems genuinely capable of delivering video, despite its high pixel count and the lack of Stacked architecture often used to speed up readout. Despite its much higher pixel count, the S1RII's main 8K, 5.XK and 4K modes exhibit comparable rolling shutter to the widely-used 24MP full-frame sensor, and with a promise of better detail and dynamic range capture. This means it can also deliver 4K/60 with a minimal crop and without the need for line-skipping.

Wedded to this underlying capability are all of Panasonic's usual video features, developed for the GH series of cameras, so it has the feature set and well-polished usability that's not always present when video gets added. For instance, if you decide you want to shoot 5.9K ProRes 422 / 24 for the bulk of your project but want to shoot some 4K/60 or 4K/120 for some slow-mo cutaways, you can add these two modes to "(My List)" to quickly swap between them, rather than having to switch from ProRes to MOV capture and then find the modes in the 18 pages of quality options those two codecs cumulatively give.

You can then set the camera to report Shutter Angle, so that you maintain an appropriate shutter speed as you switch frame rates, without the risk of forgetting to reset it when you switch back. It's not quite a full-frame GH7, but it's closer than you'd normally expect from a high-resolution body.

The S1RII is smaller than its predecessor but still finds room for a good level of control points without them becoming too small or too cramped. There's a customizable 'Lock' switch on the left of the camera to prevent accidental changes of settings.

Even more than usual, this risks overshadowing the improvements made on the stills side of the camera, because the S1R already had a very solid stills feature set, so there's less room for dramatic improvement. We weren't overly impressed by the sensor of the S1R, so we hope to get the S1RII into our studio in the next few weeks to check for improvements in that regard. The smaller, lighter body is likely to be of benefit to some photographers, whether they're landscape shooters lugging the camera to a picturesque nowhere or a wedding shooter using it for hours on end.

But, whether you shoot stills or video, it's the promised autofocus improvements on which the S1RII is likely to stand or fall. The previous camera used Panasonic's depth-from-defocus system that could deliver good results but was often disconcerting and distracting to shoot with. The new camera promises an improved version of the phase-detection system introduced with the S5II. If it really is faster and more dependable, the S1RII starts to look very interesting indeed. Our initial impressions are mixed: when it locks on it seems really tenacious, but there are other occasions on which it fails to focus on anything, to a degree we're not used to seeing in modern cameras. We're really hoping this can be addressed in firmware.

On paper, the S1RII promises to be an affordable option for someone looking to capture high res photos and high-quality video. We're already out using the camera and will report back on its real-world performance as soon as we can.

Sample gallery

Please do not reproduce any of these images on a website or any newsletter/magazine without prior permission (see our copyright page). We make the originals available for private users to download to their own machines for personal examination or printing (in conjunction with this review); we do so in good faith, so please don't abuse it.

Sample galleryThis widget is not optimized for RSS feed readers. Click here to open it in a new browser window / tab.

High-res hybrid: Panasonic Lumic DC-S1RII initial review

When you use DPReview links to buy products, the site may earn a commission. Sample galleryThis widget is not optimized for RSS feed readers. Please open this article's permalink in a browser to view this content.

Product photos: Mitchell Clark

The Panasonic Lumix DC-S1RII is the company's latest high-resolution full-frame mirrorless camera, now beefed-up with 8K video capabilities and improved autofocus.

Key features
  • Full-frame 44MP dual gain CMOS sensor
  • 8.1K/8K video at up to 30p
  • 5.76M dot viewfinder
  • Flip-out and tilt rear screen
  • ProRes 422 and ProRes RAW capture
  • Capture to CFExpress Type B, UHS II SD or external SSD
  • Multi-shot high res mode up to 177MP
  • 32-bit float audio via optional XLR 2 adapter

The S1RII will be available from late March with a recommended retail price of $3300.

Index: What's new New sensor

Rather than the 47MP used in the original S1R, or the 61MP chip used in Leica's SL3, Panasonic has opted for a slightly lower resolution but faster sensor for the S1RII.

It features dual conversion gain on which, as usual on Panasonic cameras, you can manually select which of its two readout modes it uses. Panasonic doesn't always disclose when it's using BSI technology, but in this instance it has confirmed it.

Autofocus

The S1RII represents the second generation of Panasonic cameras to feature phase detection autofocus, with the inherent depth awareness that this brings. The company says it's significantly improved both its subject recognition and its tracking algorithms in the new camera, to bring its performance closer into line with the best of its peers.

The S1RII has algorithms trained to recognize the following subjects:

  • Human
  • Animal (Dog, Cat, Bird)
  • Car
  • Motorcycle / Bike
  • Train
  • Airplane

We're told it should be quicker at finding a subject and better at continuing to track it, even if, for instance, the subject turns away from the camera or is partially obscured. As before, you can choose whether the camera homes-in on specific details, such as the helmet of a motorbike rider, the nose of a plane or the eyes of an animal. Selecting the more precise focus position can lower the system's responsiveness to smaller, faster-moving subjects.

Cinelike A2 color mode

The S1RII gains a new 'Cinelike A2' color mode, in both stills and video modes. It offers a very gentle response, somewhere between the flat, DR-prioritizing Cinelike D2 and the punchy, ready-to-go Cinelike V2 profile.

Panasonic says the A2 mode's color response stems from work they've been doing in recent months. And it's perhaps worth considering which partners Panasonic has been working with, recently, to guess at the significance of the letter 'A' in the name. Unlike the camera's Leica Monochrome mode, any connection isn't made explicit.

Real time LUT

The S1RII gains the Real Time LUT function we've seen on recent Panasonic cameras, letting you create and upload color and tone-modifying profiles in format with a workflow that's already widely supported across the industry. The S1RII allows you to load up to 39 LUTs onto the camera, with the option to combine two LUTs with varying intensity, if you wish.

Additional LUTs can be created or downloaded via Panasonic's Lumic Lab app.

False color

The S1RII becomes one of the first stills/video cameras to include a false color display option. This is a feature common in the video world, giving a mono preview with certain brightness levels highlighted in different colors, to help you recognize which bits of the image are clipped or near clipping and which areas are exposed as mid tones or at a level appropriate for light skin tones. This display can be used in boths stills and video modes.

Capture One tethering

The S1RII becomes the first Panasonic camera that can be shot, tethered, from Capture One, the popular studio software. We're told any decisions about whether to expand support to other models will depend on customer demand.

What's new for video

The 44MP sensor means the S1RII has slightly more horizontal pixels than necessary to deliver UHD 8K (7680 x 4320) footage and a fraction short of what's needed to capture the DCI 8K's 8192 x 4320 resolution. Instead it offers what Panasonic called 8.1K (8128 x 4288), which conforms to the same 1.89:1 aspect ratio as DCI footage.

The degree to which the sensor resolution is suited to 8K capture is unlikely to be coincidental, and the S1RII offers the kind of extensive video feature set that you might expect from the company that brought us the GH series, rather than the pared-back list of options the original S1R brought.

It also includes everything you'd expect from Panasonic: the option to set exposure in terms of shutter angle, waveforms, vectorscopes, filtering or custom lists of video modes, four-channel audio and 32-bit Float audio via the optional XLR2 accessory, support for anamorphic lenses and a tally lamp to let you know you're rolling. The attention to detail goes beyond the addition of a big red button on the front.

Video options: Output
dimensions Frame
Rates Crop MOV ProRes 1.89:1 modes 8.1K 8128 x 4288 30, 25, 24 1.0 4:2:0 – 5.8K 5760 x 4030 30, 25, 24 1.0 422/HQ 30, 25, 24 1.31 – RAW/HQ 60, 50, 48 1.04 4:2:0 – DCI 4K 4096 x 2160 30, 25, 24 1.0 4:2:2 422/HQ 60, 50 1.04 60, 50, 30, 25, 24 1.52 120, 100 1.10 4:2:2 – 16:9 Modes 8.0K 7680 x 4320 30, 25, 24 1.0 4:2:0 – 5.9K 5888 x 3312 30, 25, 24 1.0 – 60, 50, 48 1.11 – UHD 4K 3840 x 2160 30, 25, 24 1.0 4:2:2 422/HQ 60, 50 1.11 60, 50, 30, 25, 24 1.52 120, 100 1.17 4:2:2 – 3:2 Modes 6.2K open gate* 6432 x 4228 30, 25, 24 1.0 4:2:0 – 4:3 Modes 4.7K 4736 x 3552 60, 50, 48, 30, 25, 24 1.65 4:2:0 422/HQ** - Boxes marked green off All-I compression options.
- Red boxes have a ProRes option.
* 8.1K and 7.1K open gate capture promised in future firmware
** ProRes 422/HQ only available up to 30p

The S1RII can also shoot Full HD (1920 x 1080) footage at any of the frame-rates and crops offered in UHD 4K mode, with the additional ability to capture 120 and 100p footage from the APS-C region.

Dynamic Range Expansion

The S1RII gains a DR Expansion mode, letting you capture an additional stop of highlight information in high-contrast situations. This can be activated in any of the movie modes at frame rates up to 30p, and can only be applied when shooting V-Log footage (where the response curve can easily accommodate different levels of DR capture).

Base ISO 2nd gain step Standard color mode ISO 80 ISO 400 Cinelike D2, V2, A2 ISO 160 ISO 800 HLG ISO 320 ISO 1600 V-Log ISO 200 ISO 1000 V-Log + DR Expansion ISO 400 ISO 2000

This is not the same system as the dual readout DR Boost function in the company's 25MP Micro Four Thirds camera. Instead it moves to a higher bit-depth readout, meaning there's a rolling shutter cost to engaging it. It also boosts the minimum available ISO, to prompt the use of a lower exposure, to capture that additional stop of highlights.

Open gate shooting

At launch the S1RII will be able to capture 6.4K footage from the entire 3:2 region of its sensor, downscaled from full-resolution capture.

Open gate shooting lets you choose and adjust your crop during post production. It also makes it possible to frame wide and then take both landscape and portrait video crops if you're trying to deliver to multiple different output platforms.

5.XK at up to 60p, 4K at up to 120p

Like the S5II models, the S1RII gives you the choice of 1.89:1 DCI 4K capture or 16:9 UHD 4K, or 5.9K or 5.8K versions taken from the same capture regions. All four are available as 10-bit footage, with 4K encoded with 4:2:2 chroma precision and the 5.XK modes in 4:2:0.

Footage up to 30p is taken from the full width of the sensor using the full capture resolution, with a slight crop in to give 60p. 4K (in both flavors) is available at up to 120p with the addition of a further slight crop. Line skipping is used to deliver these 100p and 120p modes.

DCI and UHD 4K can also be captured at up to 60p from an APS-C region of the sensor.

UHD DCI Crop Rolling shutter Crop Rolling shutter 8K, 5.xK*, 4K
30/25/24 1.00 24.9ms 1.00 22.4ms 5.xK*, 4K
50/60 1.11 15.4ms 1.04 15.3ms 4K
100/120 1.17 7.3ms 1.10 7.3ms 4K/30 DRExp* 1.00 31.7ms 1.00 29.8ms *8.1K and 5.9K modes give the same results as DCI 4K, 8.0K and 5.8K matches UHD

Tellingly the rolling shutter rate in DR Expansion mode is consistent with the rate of 14-bit stills, which suggests it's based on 14-bit capture, explaining Panasonic's claims of greater dynamic range.

In turn, the 60p output's rolling shutter is consistent with the 12-bit stills readout rate. This stongly implies that the standard 24, 25 and 30p modes, which are slower than this but quicker than 14-bit mode are taken from 13-bit capture.

In addition to the conventional MOV compressed footage, the S1RII also lets you capture various resolutions in either ProRes 422 or ProRes RAW formats, both of which can either be recorded to the camera's internal CFExpress type B card or to an external SSD. ProRes RAW (with a choice of HQ or standard compression levels) is taken from a 1.31x crop of the sensor, whereas the ProRes 422 (again HQ or Std) is derived from the full-width 8.1K capture.

Forthcoming attractions

As usual for Panasonic cameras, the company has already given some details of features that are still being worked-on for the camera, and which it has promised will come in later firmware updates.

At launch the S1RII can capture open gate video footage at 6.4K resolution, but we're told 7.1K and 8.1K (native resolution) will be enabled in a later firmware update.

Similarly, the S1RII can currently output footage at up to 8K over HDMI but will gain the option to output a Raw data stream in 8.1K or 7.2K resolutions, at a later date.

How it compares

The new, more compact S1RII arrives in a market where you can choose between the high resolution Sony a7RV or pay more for the likes of Nikon's Z8 and Canon's EOS R5 II that are both high resolution and fast. The Panasonic occupies something of a middle ground: offering some of the speed of the faster cameras (a higher peak frame rate but with more rolling shutter), but at a lower cost than Canon and Nikon's Stacked CMOS cameras.

We've opted to include the Canon EOS R5 II in this table, but the Nikon Z8 ends up looking very similar in terms of areas of strength, if you were to substitute that in. We've also chosen the DSLR-shaped a7R V from Sony, rather than the smaller, less expensive a7C R, because the larger model more closely resembles the Panasonic in terms of form factor, viewfinder quality, shutter options and screen articulation. But if size and price are your biggest concerns, the a7C R is in the running.

Panasonic Lumix DC-S1RII Canon EOS R5 II Sony a7R V Panasonic Lumix DC-S1R MSRP $3300 $4300 $3900 $3700 Pixel count 44MP 45MP 61MP 47MP Sensor type BSI CMOS Stacked CMOS BSI CMOS FSI CMOS Stabilization
(IBIS / Synced) 8.0 EV /
7.0 EV – /
8.5 EV 8.0EV /
– 6.0 EV /
7.0 EV Max burst rate (Mech / E-shutter) 10 fps / 40 fps 12 fps / 30fps 10 fps / 9 fps / Viewfinder res / mag 5.76M dot OLED / 0.78x 5.76M dot OLED / 0.76x 9.44M dot
OLED 0.9x 5.76x dot OLED / 0.78x Rear screen 3.2" 2.1M dot Tilt + Fully Artic. 3.2" 2.1M dot Fully Artic. 3.2" 2.1M dot Tilt + Fully Artic. 3.2" 2.1M dot two-way tilt Max video resolution

8.1K [1.89:1] / 30p
UHD 8K / 30p
Full-width 5.9K 60p

DCI 8K / 60p
UHD 8K / 60p

UHD 8K / 24p

5K [3:2] / 30p
UHD 4K / 60p

Output options MOV H.264
MOV H.265
ProRes 422
ProRes RAW

MP4 H.264
MP4 H.265
Canon Raw (/Light)

MOV H.264
MOV H.265 MOV H.265
MP4 H.264 Storage formats 1x UHS-II SD
1x CFe B
External SSD 1x UHS-II SD
1x CFe B 2x UHS-II SD / CFe A 1x UHS-II SD
1x CFe B / XQD Flash sync speed 1/250 sec 1/250 sec
1/160 sec 1/250 sec 1/320 sec HDR output options (Stills / Video) - / HLG video HDR PQ HEIF / HDR PQ video HLG HEIF
/ HLG video HLG Photo / HLG video USB USB-C
3.2 Gen 2
(10 Gbps) USB-C
3.2 Gen 2
(10 Gbps) USB-C
3.2 Gen 2
(10 Gbps) USB-C
3.1 Gen 1
(5 Gbps) Battery life
LCD / EVF 350 / 300 540 / 250 530 / 440 380 / 360 Dimensions 134 x 102 x 92mm 139 x 101 x 94mm 131 x 97 x 82mm 149 x 110 x 97mm Weight 795g 746g 723g 1,020g

Despite being comfortably less expensive than its immediate peers, the S1RII's specs are competitive across the board. And while its video exhibits a fair bit more rolling shutter than the Stacked-sensor Nikon and Canon models, it significantly out-performs the Sony.

The a7R V's rolling shutter rate of 38ms means it can't deliver 8K/30, whereas the Panasonic can shoot 8K 30 and do so as fast as 24ms. This is respectable but not as impressive as the ∼13 and 14ms that the EOS R5 II and Z8 provide, respectively, from their much more expensive sensors.

Much of whether it's actually competitive, for both stills and video, will come down to whether the autofocus improvements are as significant as Panasonic promises.

Body and handling

The S1RII uses a body based on the smaller S5II series, rather than the more substantial design of the first-gen S1 series cameras. This leaves it both smaller and lighter than its predecessor.

It has the internal fan from the S5II, with two small exhaust ports on either side of its viewfinder hump. This doesn't give quite 'GH series' recording reliability, but still allows the S1RII to record for extended periods.

However, while the body itself is similar in size to the S5II, it has a deeper hand grip, making it more comfortable to use with larger lenses. It maintains a row of three buttons along its top plate, immediately behind the shutter button, but omits the top plate display that the Mark 1 had.

Other losses in the move to the smaller body see the S1RII offer only a single function button between the mount and the hand grip, and the replacement of the two-position switch at the lower corner of the front panel by a large red [REC] button (whose function can be customized).

The S1RII also goes without a flash sync socket, but gains a dedicated Stills/Movie/Slow&Quick switch. Moving the exposure modes to the right of the camera allows the drive mode to be promoted to the top of the left-side dial, making room for shooting mode to occupy the switch underneath. Both mode dials have toggle lock buttons.

The removal of movie mode from the exposure mode dial in turn provides room for five custom positions on the exposure dial, each of which can be customized separately for stills and video custom settings. Position 5 on the dial can be used to access custom banks 5-10, if you wish, giving you a total of up to ten photo and ten video custom setting sets. Thankfully the camera's settings can be saved to a memory card and duplicated across cameras.

Rear screen

On the back of the camera, Panasonic has adopted a similar screen layout to the Sony a7R V: a fully articulated rear screen mounted on a cradle that tilts up and down. This means that stills shooters can use the tilt mechanism if they want to keep the screen on-axis (and can flip the screen to face inwards for protection, when stowing the camera), but video shooters can extend the screen out and tilt it away from the mic, headphone and HDMI sockets while shooting.

Battery

The S1RII uses the same 15.8Wh DMW-BLK22 battery as the S5II, a significant reduction compared with the original S1R. Despite this, it achieves a CIPA battery rating of 350 shots per charge if you use the rear screen and 300 via the viewfinder. The usual caveats apply to this number: most people get many, many more shots out of a camera than the CIPA rating (between two and three times the rated figure isn't unusual). To put it in context, 350 is a respectable figure and shouldn't leave you caught out during a busy day's shooting, but it doesn't have the confidence-inspiring duration that Sony's a7R V offers.

A new DMW-BG2 battery grip is also available to fit the S1RII. It adds a second battery in the grip, and is designed to allow hot-swapping of batteries: the external battery is used until the battery door is opened, at which point the camera switches to using the internal battery until a new battery is inserted in the grip. The grip also allows the camera to use both batteries simultaneously, for high power-consumption combinations such as capturing high bit-rate video to an external SSD.

Initial impressions

The S1RII is an interesting proposition: replacing a camera we get the impression didn't exactly fly off the shelves. Panasonic has done a lot to broaden its appeal, making it smaller, faster, more video capable and, notably, less expensive.

The easiest to spot changes are on the video side of things: Panasonic pitched the S1R as a photographer's camera, so the decision to make the S1RII more of a hybrid sees even more of an expansion in video capabilities than we've become used to over the past few years.

The S1RII's sensor seems genuinely capable of delivering video, despite its high pixel count and the lack of Stacked architecture often used to speed up readout. Despite its much higher pixel count, the S1RII's main 8K, 5.XK and 4K modes exhibit comparable rolling shutter to the widely-used 24MP full-frame sensor, and with a promise of better detail and dynamic range capture. This means it can also deliver 4K/60 with a minimal crop and without the need for line-skipping.

Wedded to this underlying capability are all of Panasonic's usual video features, developed for the GH series of cameras, so it has the feature set and well-polished usability that's not always present when video gets added. For instance, if you decide you want to shoot 5.9K ProRes 422 / 24 for the bulk of your project but want to shoot some 4K/60 or 4K/120 for some slow-mo cutaways, you can add these two modes to "(My List)" to quickly swap between them, rather than having to switch from ProRes to MOV capture and then find the modes in the 18 pages of quality options those two codecs cumulatively give.

You can then set the camera to report Shutter Angle, so that you maintain an appropriate shutter speed as you switch frame rates, without the risk of forgetting to reset it when you switch back. It's not quite a full-frame GH7, but it's closer than you'd normally expect from a high-resolution body.

The S1RII is smaller than its predecessor but still finds room for a good level of control points without them becoming too small or too cramped. There's a customizable 'Lock' switch on the left of the camera to prevent accidental changes of settings.

Even more than usual, this risks overshadowing the improvements made on the stills side of the camera, because the S1R already had a very solid stills feature set, so there's less room for dramatic improvement. We weren't overly impressed by the sensor of the S1R, so we hope to get the S1RII into our studio in the next few weeks to check for improvements in that regard. The smaller, lighter body is likely to be of benefit to some photographers, whether they're landscape shooters lugging the camera to a picturesque nowhere or a wedding shooter using it for hours on end.

But, whether you shoot stills or video, it's the promised autofocus improvements on which the S1RII is likely to stand or fall. The previous camera used Panasonic's depth-from-defocus system that could deliver good results but was often disconcerting and distracting to shoot with. The new camera promises an improved version of the phase-detection system introduced with the S5II. If it really is faster and more dependable, the S1RII starts to look very interesting indeed. Our initial impressions are mixed: when it locks on it seems really tenacious, but there are other occasions on which it fails to focus on anything, to a degree we're not used to seeing in modern cameras. We're really hoping this can be addressed in firmware.

On paper, the S1RII promises to be an affordable option for someone looking to capture high res photos and high-quality video. We're already out using the camera and will report back on its real-world performance as soon as we can.

Sample gallery

Please do not reproduce any of these images on a website or any newsletter/magazine without prior permission (see our copyright page). We make the originals available for private users to download to their own machines for personal examination or printing (in conjunction with this review); we do so in good faith, so please don't abuse it.

Sample galleryThis widget is not optimized for RSS feed readers. Click here to open it in a new browser window / tab.

There's a new version of Photoshop for phones and it's more powerful than ever

Image: Adobe

Adobe has announced it is expanding its popular photo editing program, bringing Adobe Photoshop to smartphones. Until now, users could only access Adobe Photoshop Express on phones, but that app lacks many of the critical tools that make Photoshop so useful. That changes with the company's latest app, however, with the aim of "bringing the ultimate image editing and design app to a new generation of creators."

Adobe understands that many people exclusively use their phones for editing images or creating artwork. The new Photoshop mobile app brings "Photoshop's iconic image editing and design capabilities" to your phone, offering greater functionality than the Photoshop Express app. It will enable Photoshop's "tools for precise selections, targeted adjustments, advanced color corrections, expanded access to commercially safe AI with Firefly-powered generative AI tools, full format support for opening and editing any Photoshop document and more."

Image: Adobe

To accommodate a robust set of tools, Adobe designed the new app from the ground up with an "accessible and intuitive interface" made specifically for phones. This interface, by necessity, looks very different from the desktop version, as phones have far less screen real estate (not to mention usually a different aspect ratio). There is no toolbar on the side of the app like the desktop version. Instead, Adobe concentrated things on the bottom of the screen with a simplified workflow, highlighting the most commonly used tools. There's also a small layer stack on the right side of the app.

The new app will provide access to unlimited layers, plus masking and blending modes.

Image: Adobe

One of Photoshop's most important features is the ability to edit non-destructively in layers. Layers were notably missing from the Photoshop Express app, so seeing those coming to the new mobile app is certainly nice. Users can access the standard Photoshop layer types, including adjustment layers, and create unlimited layers. Adobe also added masking and layer blending tools, with plenty of flexibility in how you select and edit individual items. Plus, those layers will remain even when you close the app, so you can keep changing things without starting the process over.

One new tool coming to the Photoshop mobile app is Tap Select. This tool will automatically select all the obvious subjects and objects in an image, providing a list of components you can edit selectively. Should Tap Select not get the objects you want, you can add to that list with the Lasso tool or use the Magic Wand.

With an expanded web platform and new mobile app, users can seamlessly switch between interfaces.

Image: Adobe

Adobe also expanded the web experience to help those who want more flexibility with where and when they edit. It promises a complementary user interface across web and mobile, making it easy to bounce between the two platforms. Adobe says that with "seamless integration between the mobile and web experiences, the new offering empowers creators to work on the same project across devices." To accomplish this, Adobe made changes to the user interface of Photoshop on the web and expanded availability across Safari, Chrome, Firefox and Edge browsers. It also added Access to Firefly-powered features like Generative Fill, Generate Similar, Reference Image and updated selection models.

The new Photoshop on mobile app is available for iPhones as of today, with an Android version coming later this year. It's free to download and use, but premium features are locked behind a paywall. Additionally, while free plans will have access to a range of fonts and Adobe Stick assets, a subscription will unlock even more options. For those who want full access, you can opt for the new Photoshop Mobile and Web plan for $7.99/month or $69.99 annually. Adobe says that all current Photoshop paid plans that provide access to Photoshop on iPad and Photoshop on the web will also provide access to Photoshop on mobile.

Datacolor's new tool pulls double duty during photo sessions

Photo: Datacolor

Datacolor, the company behind powerful color management tools like the Spyder, announced a new offering to streamline photo sessions. The LightColor Meter, as the name suggests, is a multi-functional device that measures both light and color temperature. Most devices either measure light or color, though not both. It makes sense, then, that Datacolor describes this wireless tool as "a portable on-set Personal Assistant" that can save time and provide more accurate results.

“The LightColor Meter takes the guesswork out of exposure settings for those new to using a light meter, and experienced users will appreciate the added advantage of being able to measure color temperature and DUV, as well as light, with one powerful and convenient product," says Heath Barber, Director of Product Management, Consumer at Datacolor.

Photo: Datacolor

The triangular little meter can measure light and color from any source, including tungsten, LED, HMI, fluorescent, strobe and more. Since it provides continuous readings, it can even be useful in outdoor settings with shifting light.

Photo: Datacolor

What makes the LightColor Meter even more useful is its companion app. The meter uses Bluetooth to communicate with the free Datacolor LIghtColor Meter app, which is available for iOS and Android. The device continuously streams data to your phone, so you can monitor and adjust lighting without going back and forth between your subject and camera. You can sync multiple LightColor Meters together to get readings from multiple locations, which is especially ideal when working with more than one light source. Plus, it also offers filter libraries from Profoto, Lee and Rosco to help you choose the right gels for correcting color in-camera.

The Datacolor LightColor Meter is available for purchase for $399 through the Datacolor website, Amazon, and other authorized retailers. The corresponding app is completely free and also available now.

Buy now: $399 at Datacolor

Press release:

Introducing the Datacolor LightColor Meter. Measures All Types of Lighting + Color Temperature, Wirelessly. Streams Data to Your Phone in Real-Time Via Its Free App

LAWRENCEVILLE, N.J. – (February 25, 2025) – Datacolor, a global leader in color management solutions, today announced the release of its Datacolor LightColor Meter, a multi-functional device that measures both light and color temperature for any light source, including changing outdoor light, tungsten, LED, HMI, fluorescent, strobe, and more. The measurement of color temperature – the warmth or coolness of a light – provides users with essential information to choose the most appropriate lighting and exposure for a specific application to ensure consistent color appearance. Additionally, filter libraries from Profoto®, LEE® and Rosco® are included to help users select the right color-correcting gels.

Used with the free Datacolor LightColor Meter app (iOS/Android), the Bluetooth-connected device continuously streams data to your phone for time-saving remote flexibility and pinpoint accuracy. Photographers, cinematographers, and hybrid photo/video shooters can easily fine-tune lighting and exposure without leaving the camera and can sync multiple LightColor Meters for simultaneous readings from several locations for enhanced workflow efficiencies and precise exposure.

“The Datacolor LightColor Meter is like a portable on-set Personal Assistant. Its wireless feature eliminates the need to run to and from your camera to your metering location while receiving precise light and color temperature data in real-time, even in shifting light conditions such as those outdoors,” said Heath Barber, Director of Product Management, Consumer at Datacolor. “The LightColor Meter takes the guesswork out of exposure settings for those new to using a light meter, and experienced users will appreciate the added advantage of being able to measure color temperature and DUV, as well as light, with one powerful and convenient product.”

The LightColor Meter retails for $399 and is available for purchase on the Datacolor website, Amazon, and through authorized retailers. The free Datacolor LightColor Meter app is available for both iOS and Android. For more information about the product, visit datacolor.com/lcm.

Zeiss is back with two new F1.4 Otus ML prime lenses

When you use DPReview links to buy products, the site may earn a commission. Image: Zeiss

Zeiss is returning to making lenses for stills cameras, introducing the Otus ML line with new 50mm and 85mm F1.4 lenses for E, RF, and Z mounts. The lenses are manual focus only, but are focused on providing "the highest optical performance and precision mechanics," according to the company.

The lenses emphasize build quality, with an all-metal design that's sealed against dust and moisture. They also feature engraved markings for the aperture ring and depth-of-field scale. The focus ring has a very long throw, giving you precise control over the focus point – essential when pairing a wide aperture with a high-resolution camera.

Given the amount of metal and glass that make up these lenses, it's no surprise that they're on the heavy side: the 50mm weighs 677g (1.5lb) and the 85mm is 1040g (2.3lb). For reference, Sony and Canon's flagship 50mm F1.4 lenses weigh 516g and 580g, respectively, and those have autofocus motors.

The focus ring? Metal. The lens hood? Also metal.

Image: Zeiss

While the company hasn't provided exact optical formulas, it has said that the lenses use aspherical elements and have coatings to reduce ghosting and flare. The 50mm has 14 elements in 11 groups, while the 85mm has 15 elements in 11 groups. The apertures have 10 blades, and the rings to control them can be de-clicked using a special tool.

It's nice to see that Zeiss is bringing the Otus line to mirrorless cameras and that it's supporting a wide variety of mounts. Given that the original Otus line had 28mm and 100mm options and some of the wording in the company's press release, we wouldn't be surprised if we see more lenses in the Otus ML line in the future. We got the chance to shoot with a pre-production sample of the 50mm F1.4, and you can see the results for yourself in the sample gallery below.

The 50mm F1.4 will be available in the spring at an MSRP of $2500, with the 85mm F1.4 coming at an unspecified point later this year at $2999. While those are still big sums for manual focus primes, they are a fair bit more affordable than the original 55mm and 85mm Otus lenses, which retailed for $4000 and $4500, respectively.

Zeiss 1.4/50 Otus ML pre-production sample gallery Sample galleryThis widget is not optimized for RSS feed readers. Click here to open it in a new browser window / tab. ZEISS Unveils New Otus ML – Continues the Legendary Lens for Mirrorless Mounts
  • Exceptional optical performance and precision with the highest
    standards for professional photography and visual story creation,
    optimized for the latest mirrorless mounts (E, RF, and Z).
  • Creative freedom through its exceptional optical performance and
    ultimate precise focus.
  • New lens family starts with 1.4/50 and 1.4/85 in 2025

ZEISS has announced the introduction of a new Otus ML family, a series of lenses designed specifically for professional photographers and ambitious visual story creators who require the highest optical performance and precision mechanics for full creative control. For the start, the Otus ML is available in two focal lengths: a 1.4/50 lens suitable for versatile photography and a 1.4/85 lens optimized for portrait work. Inspired by the legendary ZEISS Otus family, these new lenses bring ZEISS’ renowned optical excellence to mirrorless cameras: Sony1 E, Canon2 RF- and Nikon3 Z-Mount.

Continuing the Legacy of the First Otus Generation

The Otus ML lenses are engineered to provide exceptional optical performance, revealing details that may not be discernible to the naked eye. These lenses embody the well-regarded ZEISS Look, characterized by sharpness, accurate color reproduction, and a three-dimensional quality. The apochromatic lens design ensures excellent color fidelity while minimizing chromatic aberrations. Additionally, the aspherical design contributes to virtually distortion-free images, enhancing overall image quality. The ZEISS T* anti-reflective coating further reduces reflections and flare, improving clarity and color accuracy.

From a mechanical standpoint, the Otus ML lenses offer precise manual focus, which enhance the creative and storytelling process. The lenses feature a smooth metal focus ring with a precision helicoid drive, facilitating accurate focusing. Manual aperture control, equipped with a de-click function for video, allows for seamless adjustments, which can be advantageous in various shooting scenarios.

Sebastian Döntgen, Head of ZEISS Mobile Imaging and Photography:

"We are pleased to announce the introduction of the Otus ML lens to the community of photographers. This lens reflects our ongoing commitment to quality and innovation. The Otus ML family combines classic features with modern advancements, showcasing our dedication to enhancing photographic technology while honoring traditional craftsmanship.”

Petra Visuri, Category Manager ZEISS Photography:

“Manual focusing is more than a method — it's a way for photographers to connect deeply with their creative power and craftsmanship, enabling both unparalleled control and artistic freedom. It allows for precise focusing on the center of the image, the story, and emphasizes the exact details that bring the visual idea to life.”

The all-metal construction of the Otus ML lenses is designed to endure the demands of professional photography. The compact and portable design is optimized for the latest mirrorless mounts: Sony E, Canon RF, and Nikon Z-Mount, with the 1.4/50 weighing 677g and the 1.4/85 weighing 1,040g. Clear and precise scales on the lenses enable quick adjustments, ensuring that photographers maintain control over their settings.

Mo Xie, professional photographer and ZEISS ambassador:

“The unparalleled excellence of the ZEISS Otus ML lens makes it nearly impossible to find any flaws in the images it captures. Its remarkable sharpness and true-to-life colors are exactly what I need as a professional photographer – to preserve the essence of moments, people, and things as they truly are.”

Wolf-Peter Steinheisser, professional photographer and ZEISS ambassador:

"This new lens from ZEISS is simply stunning! Incredibly sharp and precise, with a wonderfully lightweight feel in hand. The fully metal focusing ring? An absolute tactile delight—it’s a joy to use!"

The Otus ML lenses are built to perform reliably in challenging conditions. A blue sealing ring protects the camera lens interface from dust and moisture, while additional seals provide protection against splashes. The lenses are temperature resistant, functioning effectively in environments ranging from -20°C to +55°C. They have also undergone rigorous testing for mechanical, vibration, and shock resistance.

Continuing the legacy of the Otus family, which has been recognized for its low sample variation and outstanding imaging performance since its introduction in 2013, the new Otus ML combines premium optical performance with precise mechanical engineering, optimized for the latest mirrorless mounts. This positions the Otus ML as a valuable tool for ambitious photographers seeking to combine full, precise control with creative freedom while focusing on the core of their imaging work.

Product Introduction Available on the Web

The ZEISS Otus ML lens family will be presented on February 26, 2025, at 11 am CET on YouTube (@ZEISSCameraLenses) by ZEISS experts. The new ZEISS Otus ML will be available from specialist retailers: 1.4/50mm from Spring 2025 at the RRP (incl. VAT) of €2,499 / $2,500, and the 1.4/85 later in 2025 at the RRP (incl. VAT) of €2,799 / $2,999

For more information about the ZEISS Otus ML and its specifications, please visit www.zeiss.com/otus-ml. Further product and application images can be downloaded here.
(https://mam.zeiss.com/Redirect.do?urlId=NeG83aO46UUzfuLZgX79S92tByjJGAUaYcQUc8DKrrg%3D)

1 Sony is a registered trademark of Sony Corporation.
2 Canon is a trademark or registered trademark of Canon Inc. and/or other members of the Canon Group.
3 Nikon is a registered trademark of the Nikon Corporation.

Let's talk about the Sigma BF's missing card slot

When you use DPReview links to buy products, the site may earn a commission. Image: Sigma

Sigma announced its BF mirrorless camera today, with a "purposefully minimal" design that "cuts out everything that distracts, limits or stifles creativity." The "radical" simplicity is obvious looking at it – it only has five buttons, including the power and shutter release, and a dial.

The biggest concession to minimalism, though, may be what the BF lacks. It's not the first camera to omit a viewfinder or mechanical shutter, but it is one of the only modern cameras we've seen without a slot for a storage card of any kind, be it SD, CFexpress or something more exotic. Instead the camera will only record to its 230GB of internal memory, which you can access via its admittedly quite fast 10Gbps USB-C port – the only port on the camera, by the way.

It almost goes without saying that this is a very unusual decision. There are obvious benefits to a camera having internal storage – most photographers have had the experience of going to take a picture only to realize they've left their SD card at home. That's why it's not surprising that a few other photographer-focused cameras, such as the Leica M11 and Ricoh GR III, have it. However, its inclusion (almost) never comes at the cost of the ability to use external storage.

The BF is undeniably small. Maybe there was just no room for a card slot?

Image: Sigma

The company hasn't said much about why it decided to forego a card slot on the BF, though we have reached out for comment. There's an argument to be made that it helps achieve the company's ultra-simplistic vision; with the BF, you won't have to worry about remembering your SD card or making sure that it's fast enough to record 6K video. And while SD card slots are small, it's possible excluding one made it easier to make the camera as compact as it is. Cynically, it also gives people something to talk about, generating extra buzz around a major launch. In a market full of 24MP full-frame cameras around $2,000, this is just one more thing that sets the BF apart.

There are some downsides, though, beyond just the lack of flexibility. If you want to offload images to your computer but don't have a USB-C lead, you'll be out of luck. The same goes for if you're planning a mammoth shooting session that will generate more than the 14,000 JPEGs, 4300 uncompressed DNG Raws or 2.5 hours of video that Sigma says the internal storage is good for. You also don't have the option to shoot redundantly, like you can with cameras that have internal storage and a card slot or dual card slots.

We'd like to hear what you think, though. Is internal storage enough, or is the lack of a card slot more foolish than beautiful? Sound off in the comments below.

Buy now:

Buy at B&H Photo

Sigma's also announced a brand new look

Sigma's new logo and word mark shows up on its latest products and on its pop-up store in Manhattan.

Image: Sigma

Sigma has had a busy day. It's unveiled a new visual identity for its brand, alongside announcements of a new mirrorless camera with a striking design that feels like it came from Jony Ive or Teenage Engineering, a refresh of its I-series primes, a flagship sports/wildlife telephoto lens and a do-it-all APS-C lens.

Its new wordmark, aka the way it writes its name, now uses a seriffed font, which wouldn't look out of place atop a newspaper of record or on the tag for a piece of designer clothing. The previous style, which you'll find printed on the company's lenses, used a modern-style sans serif font. The company says this new style "will be gradually introduced across Sigma’s products, website, social media and product packaging." The new wordmark already shows up on its website and all the new products the company released today.

Images: Sigma

Sigma is also updating its symbol, giving it a "contemporary update." The company says its new way of writing the Greek letter sigma – used in math to notate a summation – is meant to symbolize "the guiding idea behind our manufacturing philosophy: every single product is the sum of the technology, experience, passion and expertise of everyone involved in its creation."

The new look comes alongside a push to emphasize the fact that the company's products are made in-house in Japan, a fact it highlighted in a recent video showing off its production process of a 24-70mm F2.8 lens.

Alongside the new look, Sigma announced a new "Art Projects" initiative, where it will "collaborate with artists to produce and share their work." The first two artists involved in the program are Sølve Sundsbø and Julia Hetta, and the company's site now features pages showing off the two's work.

Press release:

Sigma Announces New Visual Identity & New Art Projects Initiative

On February 24, 2025, Sigma Corporation (CEO: Kazuto Yamaki) will adopt a new visual identity for its products and brand.

Since Sigma’s founding in 1961, we have continued to innovate and push the standards of optical engineering out of a deep respect for the creative ways photographers and filmmakers engage with the world. With our new visual identity, we refocus on the essence of our manufacturing philosophy and communicate our desire to provide outstanding products and services to our customers.

The way cameras and photography relate to our lives is constantly changing, as the industry undergoes constant evolution and occasional revolutionary leaps. At the same time, the fundamental desire at the heart of photography – to capture and share moments – remains unchanged. Our new visual identity reflects our unwavering commitment to supporting this pursuit through exceptional craftsmanship and creativity.

Wordmark & Symbol

The most striking changes concern Sigma’s wordmark and symbol.

The new symbol is a contemporary update of the symbol that has been in use since Sigma’s founding. Based on the Greek letter Σ, it reflects the name of our company and symbolizes the guiding idea behind our manufacturing philosophy: every single product is the sum of the technology, experience, passion and expertise of everyone involved in its creation. Our new visual identity will be gradually introduced across Sigma’s products, website, social media and product packaging.

Sigma Aizu Japan

Sigma’s production is entirely based in Japan, with every lens, camera and other product manufactured at Sigma’s factory in Aizu and our supply chain concentrated in the Tohoku region. Our commitment to keeping everything local has resulted in the unique levels of craftsmanship, know-how and technology that define our products today.

In our future brand communication, we will place more emphasis on the origin of our exceptional quality: Made in Aizu, Japan.

Art Projects and Deeper Commitment to the Arts

As a camera and lens manufacturer, we have always been deeply motivated by the art of photography. We are inspired by the passion of photographers and filmmakers everywhere and hope that our relentless pursuit of quality and innovation will help artists realize their visions.

Supporting the photographic and visual arts is a core tenet of our corporate mission. In addition to our ongoing sponsorships and partnerships with numerous festivals and cultural events, as well as maintaining, growing, and exhibiting our library of photobooks, we will continue to expand and deepen our support of the arts through several new endeavors.

With the launch of our new visual identity, we are introducing Art Projects, a new initiative in which we will collaborate with artists to produce and share their work.

The first artists to work with us are Sølve Sundsbø and Julia Hetta.

For more details and further updates on the Art Projects, please visit https://www.sigma-global.com/en/art-projects

Join us in our forums to discuss all the new Sigma announcements

When you use DPReview links to buy products, the site may earn a commission. Image: Sigma

Sigma had a big day yesterday, announcing multiple new lenses and a bold new camera. The Sigma BF takes a new approach to mirrorless cameras, simplifying things to only the essentials. On top of that, it also revealed the do-it-all APS-C 16-300mm F3.5-6.7 lens, powerful 300-600mm F4 lens for wildlife and sports and nine restyled I-series prime lenses.

Following yesterday’s announcements, we’re inviting you to participate in the discussion in our forums. We’re also collecting your feedback and questions for our editors. They are on the ground in Japan and will be getting their hands on Sigma’s new gear. As a result, they will be able to answer some of your inquiries this week.

Those interested in discussing the Sigma BF can visit the discussion thread dedicated to the new camera. Or, if you are intrigued by Sigma’s new 16-300mm F3.5-6.7 and 300-600mm F4 lenses, head over to the discussion thread here.

Sigma BF, a mirrorless camera unlike anything you've seen

When you use DPReview links to buy products, the site may earn a commission. Rendering: Sigma

Sigma has revealed the BF, a radically minimalist 24MP full-frame L-mount mirrorless camera.

It's a compact mirrorless body with a single rear-plate dial and three buttons that haptic feedback when pressed. Sigma says the interface has been designed to be simple and intuitive. Other than these three rear buttons, the camera has shutter and power buttons.

It offers phase-detection autofocus, which is combined with a subject recognition system designed to detect humans, dogs and cats: a first for Sigma.

Buy now:

Buy at B&H Photo

The BF has 230GB of internal memory instead of any removable media cards and uses the USB slot to transfer data off the camera. Sigma says this is sufficient for 14,000 JPEGs, 4300 uncompressed DNG Raws or 2.5 hours of video shot in its highest quality settings.

Rendering: Sigma

The body is milled from a single block of aluminum, which Sigma says is a first (though this may include caveats in the smallprint as both Leica and Hasselblad have made similar claims in the past). It weighs just 388g (13.7oz) without battery.

However, the camera has no mechanical shutter, which means it risks exhibiting rolling shutter when used to shoot fast-moving subjects. There's also no stabilization.

The BF is a small rectangular body with a texture cut into the front surface to provide grip. A small settings display to the right of the fixed live view display displays either the ISO, shutter speed or aperture value, so that the main composition panel doesn't have to have camera settings intruding on the view.

In addition to stills, the BF can capture 6K video at up to 30p, or 4K footage derviced from 6K capture. This can be in H.264 or H.265 and has the option to use Leica's L-Log response curve for preserving flexibility for making tone and color adjustments in post.

There are no ports on the camera, other than a single, exposed USB-C socket on the side of the body. On the base there's just a tripod socket and a catch to release the battery.

The Sigma BF will be available in a choice of black or silver, with both versions retailing for around $2000. Silver versions of Sigma's i-series primes will be available in L-mount, to match the camera.

Buy now:

Buy at B&H Photo Announcing the “Radically Simple” Sigma BF camera

Ronkonkoma, New York - SIGMA Corporation of America, the US subsidiary of SIGMA Corporation (CEO: Kazuto Yamaki. Headquarters: Asao-ku, Kawasaki-shi, Kanagawa, Japan) is pleased to announce the Sigma BF, a 24-megapixel full-frame L-Mount camera. The Sigma BF presents an uncompromising new vision for the digital camera. Stripped to the essence but packed with power, innovative yet rooted in the origins of photography, it is designed to accompany you throughout your day and to capture the spontaneous beauty of everyday life. The BF balances performance with simplicity and returns the focus to what matters most: your photographs. The Sigma BF will retail for $1,999 and be available in April 2025.

A radically simple camera that evokes the essence of photography
A full-frame mirrorless camera offering an unprecedented intuitive shooting experience

Staying close to the photographer, the Sigma BF captures the beauty that lies hidden in everyday life, and becomes the catalyst to be aware of that beauty.
The BF focuses on the joy of photography that only a camera as a tool can provide. By simplifying and stripping away all excess elements, this full-frame mirrorless camera redefines the process of taking a photograph as a natural act.
The unique user interface, which provides a new sense of connection between the photographer and the camera in a true seamless unibody, is more intuitive than ever with its pressure-sensitive haptic buttons and dial. The high-definition expression of the approximately 24-megapixel full-frame sensor and the reliable dual autofocus system bring your vision to life.

Key features Simple, clear, and completely new user interface

The user interface has a completely new information structure compared to conventional digital cameras, with the main shooting-related settings stored on the live view screen, secondary settings in the optional menu, and management functions and detailed settings in the system menu. Users can easily operate the shutter speed, aperture, ISO sensitivity, EV compensation and color mode, along with other important shooting-related elements at the touch of a finger. Combined with the auto setting, the functions of the general shooting mode dial are also covered.

Clear live view and status monitor

The default live view screen displays only the minimum necessary information and can be changed to display no information at all. Since the currently active setting is displayed on the status monitor, the users can concentrate solely on composition and the subject on the live view screen.

Minimal controls and haptics

All controls are integrated into just three buttons, one dial, the shutter release, and the power button. The BF is the first mirrorless camera* to incorporate haptics into its Dial, Center button, Option button, and Playback button, resulting in minimal physical wear. The buttons are always accurate and comfortable to press.
 * As of February 2025, by Sigma.

Unibody structure

The BF is the first camera in history* to feature a true unibody, which boasts unprecedented rigidity. Each camera is carved from a single, solid block of aluminum over the course of seven hours. The reliable, comfortable weight of its seamless all-metal body harmonizes perfectly with any attached lens.
* As of February 2025, by Sigma.

Internal storage

The BF features 230 GB of internal memory, capable of storing more than 14,000 JPEG files, 4,300 uncompressed RAW images or 2.5 hours of video at the highest-quality setting, with the USB-C port offering fast charging and data-transfer speeds.

Various color modes

Thirteen different color modes are available to open up new avenues of creativity. The modes range from unique options like Teal and Orange, Powder Blue, and Warm Gold to creative yet versatile options such as Rich, and Calm.

Evolved autofocus

A hybrid autofocus system combining image phase detection and contrast detection utilizes state-of-the-art algorithms to capture subjects accurately and reliably. In addition to people, dogs and cats can be detected in the subject detection mode.

Video shooting (6K, L-Log)

The BF supports high-resolution 6K and L-Log recording, enabling video production that takes advantage of the wide dynamic range of a full-frame sensor.

Equipped with L-Mount

The L-Mount lens mount allows the camera to be used with a wide variety of interchangeable lenses for mirrorless cameras from Sigma as well as other L-Mount Alliance partners.

Sigma BF specifications PriceMSRP$2000 Body typeBody typeRangefinder-style mirrorlessBody materialAluminumSensorEffective pixels25 megapixelsSensor photo detectors25 megapixelsSensor sizeFull frame (36 x 24 mm)ImageUncompressed formatRAWScreen / viewfinderArticulated LCDFixedScreen size3.2″Screen dots2,100,000Touch screenYesLive viewYesViewfinder typeNoneStorageStorage typesInternal onlyStorage included230GBConnectivityUSB USB 3.2 Gen 2 (10 GBit/sec)USB chargingYesMicrophone portNoHeadphone portNoPhysicalDimensions130 x 73 x 37 mm (5.12 x 2.87 x 1.46″)

Sigma announces 16-300mm F3.5-6.7 DC OS, a lens with a huge 18.8x zoom ratio

When you use DPReview links to buy products, the site may earn a commission. Image: Sigma

Sigma has announced the 16-300mm F3.5-6.7 DC OS Contemporary lens, a wide-angle to telephoto, image-stabilized zoom for APS-C cameras that provides a 24-450mm equivalent focal length. Sigma claims it's the longest zoom ratio available in an APS-C lens and that it will be ideal for applications ranging from landscape to sports photography. It will be available in L-mount, E-mount, X-mount and RF-mount.

Optically, the lens comprises 20 elements in 14 groups and includes 1 FLD, 4 SLD and 4 aspherical elements. It contains one high refractive index glass element, which Sigma says has "significant thickness variation."

Buy now:

Buy at B&H Photo

The lens has a close focusing distance of 17cm (6.7") at its widest angle and 105mm (41.4") at the telephoto end. The maximum magnification of 1:2 occurs at 70mm and is 1:3 at 16mm, and 1:4 at 300mm. The front element includes a water and oil-repellent coating. According to Sigma, the lens is designed to suppress focus breathing, making it useful for video work and applications like focus stacking.

Sigma says the autofocus is driven by its high-response linear actuator motor to provide fast and smooth autofocus. Image stabilization is rated at 6 stops at the wide, and 4.5 stops at the telephoto setting. A zoom lock switch is included to prevent lens creep when mounted on a camera.

Physically, the lens is 73.8mm (2.9") in diameter and 121.4mm (4.8") long and includes threads for a 67mm filter. It weighs in at 615g (1.4 lbs). Sigma rates it as dust and splash-resistant.

The Sigma 16-300mm F3.5-6.7 DC OS Contemporary has a retail price of $700 and will be available beginning April 17.

Buy now:

Buy at B&H Photo Sigma presents the world's first mirrorless lens with an approximate zoom ratio of 18.8x. Powerful yet portable, the 16-300mm F3.5-6.7 DC OS | Contemporary delivers outstanding results in any situation.

Ronkonkoma, New York - SIGMA Corporation of America, the US subsidiary of SIGMA Corporation (CEO: Kazuto Yamaki. Headquarters: Asao-ku, Kawasaki-shi, Kanagawa, Japan) is pleased to announce the 16-300mm F3.5-6.7 DC OS | Contemporary lens for the US market. the Sigma 16-300mm F3.5-6.7 DC OS | Contemporary features an 18.8x zoom ratio, the world’s largest*1 for an APS-C format mirrorless lens. Equivalent to 24-450mm in 35mm format, this portable lens covers everything from wide-angle for landscapes and interiors to super-telephoto for sports, wildlife and aviation. This extremely versatile lens brings the full range of photographic subjects within reach, from landscapes and portraits to wildlife and sports photography. The lens is available in L-Mount, Sony E-Mount, Fujifilm X Mount and Canon RF Mount and will retail for $699 through authorized US retailers.

Sigma presents the world's first*1 mirrorless lens with an approximate zoom ratio of 18.8x. Powerful yet portable, the 16-300mm F3.5-6.7 DC OS | Contemporary delivers outstanding results in any situation.

The all-new Sigma 16-300mm F3.5-6.7 DC OS | Contemporary features an 18.8x zoom ratio, the world’s largest*1 for an APS-C format mirrorless lens. Covering the entire range from wide-angle to super-telephoto, this extremely versatile lens brings the full range of photographic subjects within reach, from landscapes and portraits to wildlife and sports photography.

With a maximum magnification ratio of 1:2, the 16-300mm F3.5-6.7 DC OS | Contemporary captures detailed close-ups with ease. Its HLA (High-response Linear Actuator) motor provides exceptionally fast, smooth and accurate autofocus - ideal for fast-moving subjects such as birds and aircraft. The lens offers 6 stops of image stabilization at the wide end and 4.5 stops*2 at the telephoto end, helping photographers achieve blur-free results even at longer focal lengths and in low light.

This ultra versatile all-in-one zoom is the perfect tool for creative photographers who want to work in a wide range of photographic genres.

*1 As an AF compatible interchangeable lens exclusively for mirrorless, as of February, 2025 by Sigma.
*2 Based on CIPA guidelines. (Measured at a focal length of 16mm and 300mm using an APS-C camera)

Wide-angle, super-telephoto and macro photography in one lens The world's first 18.8x zoom with a 16mm wide-angle setting

The Sigma 16-300mm F3.5-6.7 DC OS | Contemporary is the world's first mirrorless lens with an 18.8x zoom ratio. Equivalent to 24-450mm* in 35mm format, this portable lens covers everything from wide-angle for landscapes and interiors to super-telephoto for sports, wildlife and aviation.
* Approximately 25.6-480mm for the Canon RF Mount version.

Maximum magnification ratio of 1:2 at 70mm for striking close-ups

With a maximum magnification ratio of 1:2 at 70mm, the Sigma 16-300mm F3.5-6.7 DC OS | Contemporary provides excellent close-up performance, perfect for capturing flowers, insects and other small subjects in great detail. With a maximum magnification of 1:3 at the wide end and 1:4 at the telephoto end, photographers have access to a huge range of creative expression.

Small, lightweight and portable

Despite its impressive zoom range of 16-300mm, the Sigma 16-300mm F3.5-6.7 DC OS | Contemporary prioritizes high portability, measuring just 73.8mm in diameter by 121.4mm in length and weighing just 615g*. This is achieved through advanced mechanical and optical design, including a high refractive index glass element with significant thickness variation and an aspherical lens element.
* The figures are for the L-Mount version.

High-speed autofocus and image stabilization for effortless shooting with reliable results Accelerated AF speed and accuracy with HLA autofocus

To help photographers capture even the most fleeting moments, the Sigma 16-300mm F3.5-6.7 DC OS | Contemporary uses a High-response Linear Actuator (HLA) to achieve high-speed autofocus functionality with excellent drive accuracy.

Outstanding optical stabilization powered by the OS2 algorithm

Inspired by the same technology that powers Sigma's super-telephoto lenses used by professional wildlife and sports photographers, the Sigma 16-300mm F3.5-6.7 DC OS | Contemporary features 6 stops of optical stabilization at the wide end and 4.5 stops at the telephoto end. The latest OS2 optical stabilization algorithm provides superior image stabilization to mitigate the effects of camera shake, helping photographers achieve blur-free results without the need for a tripod, even when shooting in low light and at full zoom.

* Measured using an APS-C camera at focal lengths of 16mm and 300mm according to CIPA standards.

Equipped with a zoom lock switch at the wide end

The Sigma 16-300mm F3.5-6.7 DC OS | Contemporary features a zoom lock switch that can be fixed at the wide end to prevent the lens from extending.

Dust- and splash-resistant structure* and water-repellent coating

Designed to help photographers work in all environments, the Sigma 16-300mm F3.5-6.7 DC OS | Contemporary features a dust- and splash-resistant structure for use in harsh conditions. In addition, the front element features a water- and oil-repellent coating that helps keep the lens free of contaminants.

* The structure is designed to be dust- and splash-resistant, but not waterproof. Be careful not to bring the lens in contact with a large amount of water. Water inside the lens may cause major damage and even render the lens unrepairable.

Uncompromising optical quality that redefines the standard for super-zoom performance Consistently high image quality across the entire zoom range

Thanks to its advanced optical design with 1 FLD, 4 SLD and 4 aspherical elements, the lens has excellent aberration correction and delivers sharp results throughout the whole zoom and focus range.

Engineered to minimize flare and ghosting

By measuring light incidence under all conditions and using advanced simulation technology, the Sigma 16-300mm F3.5-6.7 DC OS | Contemporary guarantees superior resistance to flare and ghosting, allowing photographers to capture crisp, clear images in even the most challenging lighting conditions - just as an all-in-one lens should.

Suppressed focus breathing for consistent framing

The Sigma 16-300mm F3.5-6.7 DC OS | Contemporary is designed to effectively suppress focus breathing, making it a perfect choice for filmmakers as well as photographers working with multi-shot techniques such as focus stacking. Throughout the zoom range, changes in angle of view are kept to an absolute minimum when changing focus.

Sigma 16-300mm F3.5-6.7 DC OS specifications Principal specificationsLens typeZoom lensMax Format sizeAPS-C / DXFocal length16–300 mmImage stabilizationYesLens mountCanon RF-S, Fujifilm X, L-Mount, Sony EApertureMaximum apertureF3.5–6.7Minimum apertureF22–45Number of diaphragm blades9OpticsElements20Groups14Special elements / coatings1 FLD, 4 SLD, 4 asphericFocusMinimum focus0.17 m (6.69″)Maximum magnification0.5×AutofocusYesMotor typeLinear MotorFocus methodInternalDistance scaleNoDoF scaleNoPhysicalWeight615 g (1.36 lb)Diameter74 mm (2.91″)Length121 mm (4.76″)Filter thread67 mmHood suppliedYesHood product codeLH706-03

Sigma announces the ultra-telephoto 300-600mm F4 DG OS Sports lens

When you use DPReview links to buy products, the site may earn a commission. Image: Sigma

Sigma has announced the 300-600mm F4 DG OS Sports lens, designed specifically for applications like sports, action and wildlife photography.

Optically, the lens is built around 28 elements in 21 groups. It includes 6 FLD and 1 SLD element, anomalous dispersion glass, high refractive index glass, and a water and oil-repellent front coating. It's designed to provide a high level of correction for chromatic aberration throughout the entire zoom range. Sigma claims the new zoom will deliver the same optical performance as a prime lens.

Autofocus is driven by a high-thrust HLA (high-response linear actuator) motor that drives a lightweight lens focus group located close to the camera body for good balance and fast and precise AF performance.

The image stabilization system provides 5.5 stops of stabilization at 600mm. It includes two stabilization modes: Mode 2 is designed to be widely used for most still and video applications and Mode 2 is designed specifically for panning shots in the horizontal, vertical or diagonal directions.

The lens barrel is constructed from magnesium alloy, and the lens hood is made of carbon to deliver a sturdy but lightweight design. It's painted with thermal insulation paint to reduce heat absorption. The inner zoom mechanism is designed to minimize center of gravity fluctuations throughout the entire zoom range.

The lens also includes a newly added function ring that offers two modes. With the Focus Preset Mode, twisting the ring right or left will instantly shift to a pre-registered focus position. The Power Focus Mode is intended to make it easier to focus the lens at a constant speed for applications like video and supports two steps; focus speed can be changed in two steps, depending on how far the ring is turned.

Other controls include four AFL buttons, a focus mode switch, a focus limiter and OS mode switch and a custom mode switch. The L-mount version is also compatible with teleconverters.

There is a drop-in holder for 40.5mm filters. According to Sigma, it has developed a new drop-in circular polarizer and a variable ND filter with 7 stops of adjustment to use with the lens. Sigma says the lens is dust and splash-resistant.

The lens is 167mm (6.6") in diameter by 467.9mm (18.4") long. It weighs 3,985g (8.79lbs)

The Sigma 300-600mm F4 DG OS Sports lens will be available from April 2025 at a retail price of $6000.

Sigma I-series primes get a rework, including silver versions for L-mount

The Sigma 45mm F2.8 DG Contemporary, showing Sigma's new typeface.

Rendering: Sigma

Sigma's I-series prime lenses will become the first to adopt the company's revised logo and branding, with updated versions of all nine lenses losing the 'DN' designation from their names.

All nine lenses retain their original optical formulae and change only in their external appearance. The exception to this rule is the original 45mm F2.8 DG Contemporary, which has now been made compatible with the magnetic lens caps used across the rest of the series.

Silver versions of the I-series lenses will also be available, to match the silver version of Sigma's new BF mirrorless camera. Prices for all nine lenses remain unchanged.

New designation for Sigma's I-series lenses: US MSRP:
  • Sigma 17mm F4 DG Contemporary
  • Sigma 20mm F2 DG Contemporary
  • Sigma 24mm F2 DG Contemporary
  • Sigma 24mm F3.5 DG Contemporary
  • Sigma 35mm F2 DG Contemporary
  • Sigma 45mm F2.8 DG Contemporary
  • Sigma 50mm F2 DG Contemporary
  • Sigma 65mm F2 DG Contemporary
  • Sigma 90mm F2.8 DG Contemporary

$599
$699
$639
$549
$639
$549
$639
$699
$639

Live reporting from Sigma's press event

Sigma CEO Kazuto Yamaki

Photo: Richard Butler

This story is being reported live, so please regularly refresh to see the latest updates.

We're at Sigma's pre-CP+ event at its headquarters in the suburbs of Tokyo. CEO Kazuto Yamaki is talking and we'll be reporting live on what he reveals.

He says they've been working hard to provide "the best of the best." But, since he took over the company on 2012, the image quality of smartphones has increased and "the importance of the dedicated camera is gradually being questioned."

He said he went back to the founding ethos of his father: "technological innovation is an art in itself."

He says the company will focus on "technology, craftsmanship and art." To reflect this, the company is introducing a new look and new logo, with the tag-line: "The art of engineering, engineering for art."

As part of this, Yamaki says the company is establishing the Sigma Foundation that will promote the art of photography.

Σελίδες